Mf883-Silicone Sealant for Insulating Glass-Sausage with 500ml

• Customization: Available
• Capacity: 600ml
• Color: White
• Model NO.: MF883
• Drying Time: 24 Hours
• Material: Composite Materials
• Usage: Industrial
• Type: Silicone Sealant
• State: Fluid
• Mildew Proof: Mildew Proof
• Bonding Material: Glass
• Seal Tape Kind: Organic Material
• Seal Tape Usage: Architecture
• Transport Package: Box
• Specification: 500ml
• Trademark: SILANDE
• Origin: China
• HS Code: 3506919010
• Production Capacity: 8000000PCS/Year
• Package Size: 21.00cm * 14.00cm * 18.00cm
• Package Gross Weight: 6.500kg
• Lead Time: 1 days (1 - 6000 ml) ; 3 days (6001 - 60000 ml) ; To be negotiated ( > 60000 ml)

Product Description

MF883
Silicone Sealant for Insulating Glass
Insulating Glass, Structural Glazing, Facade, Curtain Wall System

 

 

 

DESCRIPTION
MF883 is one component neutral cured RTV silicone structural sealant for secondary seal of insulating glass units.
♦ APPLICATIONS
MF883 is mainly applied to secondary seal of traditional insulating glass units, with butyl as its primary seal, also recommended to glazing micro insulating glass with free edge incorporated by specialty glass types like ultra-thin glass (solar glass or screen glass).
 

• FEATURES
• Form durable and elastic sealing layer on glass and spacer surface.
• Excellent adhesion to a wide range of substrates without primer.
• Neutral cured, no corrosion to substrates surface.
• Excellent temperature stability: -60°C to 180°C.
• Non-slump, solvent free, and no pollution to environment.

 

 

 

♦ TYPICAL PROPERTIES

STANDARD	TEST ITEMS	TECHNICAL DATA	TEST RESUIT
Test condition-before cure, T: (23±2)°C, R.H: (50±5) %
GB 16776	Extrudability, s	W10	1.9
GB 13477.6	Sag, mm	W3	0
-	Application Time, min	-	20
GB 13776.5	Tack free time, h	W3	0.5
-	Curing time, d	-	7-14
-	Completely cured time, d	-	14-21
-	Range of Application Temperature, °C	-	10-40
Test condition-7days placed at T: (23±2)°C, R.H: (50±5) %
GBIT 531.1	Hardness, Shore A	20-60	48
GB/T 528	Elongation at Break, %		500
	Tensile Strength, Mpa		2.31
Test condition- 21 days placed at T: (23±2)°C, R.H: (50±5) %
	23°C	N0.6	1.14
	:"3 After Water Immersion	N0.45	1.10
	Strength, After Water-UV		1.02
	Mpa 90°C		0.97
GB 16776	-30 °C		1.45
	Adhesion Failure Area, %	W5	0
	Elongation at Max 7ensile(23°C), %	N100	220
	TGA, %	W10	3.3
	Heating Ageing Cracking	No	No
	Chalking	No	No

 

♦ APPLICATION METHODS
Surface-preparation:
The sealing joint and assembly parts must be clean, dry and free from all contamination and impurities, such as grease, dust, water logging, frost, dirties, remaining glues, assembly accessories and protective coatings.
Primer:
Adhesion test must be proceeded to confirm if primer is necessary or not. If necessary, the primer shall be applied to be a thin layer with a white cloth on the surface before applied sealant. Otherwise, apply sealant directly to clean surface of substrate.
Injection of Sealant:
Continuously extrude MF883 with a positive pressure sealant gun and fully fill it in the joints.
Tooling:
Before a skin forms, tool the sealant with light pressure to spread the sealant and make sure complete surface contact with glass and spacer.
. APPLICABLE STANDARDS

• GB 16776
• GB/T 29755

. LIMITATIONS
The product is not applicable in the following conditions:
-Single seal or primary seal of insulating glass units.
-Immersion in the water.
-Any building materials exuding grease, plasticizer or solvents, vulcanized or semi-vulcanized rubber.
-Frosted or humid surface.
-The region where atmosphere vapor is closed and cut off (as sealant is moisture curing).
-Surfaces where paints are used (generally paints cannot be adhered on surface of silicone).
-contact with food or other affiliated category.

• ATTENTIONS
• In case of contact with eyes, rinse immediately with plenty of water.
• Avoid contacting with skins for a long time, and avoid contacting with children.
• Avoid contaminating foods, medicines or cosmetics.
• Do test on adhesive property of project materials before using and refer to MSDS.
• For more information on safety use and hazards, and for safety notice which is not mentioned, please refer to relevant specification of JGJ 102.

♦ SHELF LIFE AND STORAGE

12 months from the date of manufacture, store in a low moisture, dark place below 30.in the original unopened packing.
♦ PACKAGE
Sausage: 500 ml
Drum: 200 L

♦ APPLICATION INSTRUCTIONS

GLASS / SPACER - To achieve good adhesion, the glass/ spacer surface must be clean, dry and free of any residue.
SILANDE MF910H shall be applied at a temperature between 160 °C and 190 °C using appropriate extruders.

APPLICABLE STANDARDS• EU Specification: EN1279 - part 4
SHELF LIFE AND STORAGE24 months stored in cool, dry and ventilated places.

PACKAGING

Glue injection
As shown in Figure 1, install the cushion material, spacer spacer and masking tape. Continuously squeeze DJ-A3-MF899F into and fill the joints. Flatten the sealant on the gasket material and the surface of the joint with an appropriate force. The finishing process must be done at one go after the injection is completed and the surface is not skinned.It is recommended to use convex tools to trim the rubber surface into a concave shape, and soapy water should not be used as an auxiliary material for trimming. After the trimming is completed, immediately tear off the masking tape. On the glass assembly, the sealant injected on the bottom seam must be trimmed to a bevel to prevent water accumulation. Uncured sealant is never allowed to come in contact with non-grindable surfaces, such as polished marble, metal or glass surfaces, because excess sealant cannot be completely removed with organic or chlorinated solvents. Therefore, these surfaces must be covered, or extra care must be taken when injecting glue to prevent the sealant from contacting these surfaces. Once the uncured sealant touches these surfaces, it will leave a film on the surface, which will affect the unique aesthetics of the substrate.

 

TEST ITEMS	TEST RESULTS	TESTS1ANDARD
Base	Polyisobutylene (PIB)	-
Color	Black	-
Appearance	Solid mass	GB/T 1033.1
Density	1.1/1.25 fe/cm^3]	JC/T914
Shear Strength	0.21 MPa
Penetration (1 /1 Omm)	25°C 40
	130°C 290	JC/T 914
Volatile Content	Max. 0.02 %
Fogging	Without visual fogging	-
Moisture Vapour Transmission Rate (MVTR)	0.26 [gr/m^2.24hrs. 2mm]	EN1279-4
Gas Permeation Rate (Ar)	1.30x10-^3[gi7m^2. hrs]	EN1279-4

.APPLICATION FIELD

• One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
• It can keep its plastic and sealing properties in a wide temperature range.
• Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
• Minimum moisture vapour and gas permeation.
• Excellent temperature stability: - 30°C to 80°C.

♦ TECHNICAL DATA - TYPICAL PROPERTIES
MF322 two-component polyurethane corner glue
Mainly used for bonding and sealing between aluminum alloy corners and profile cavities in aluminum alloy door and window structures; suitable for bonding wooden doors, windows and doors; for processed different materials, such as wood, building materials, ceramics and metals It has good adhesion.
How to use instructions
Remove dirt, dust, oil, frost, etc. on the surface of the substrate; place the plastic nozzle on the open bottle mouth and tighten it, and use a dedicated 1:1 double bottle glue gun to inject glue. Uncured glue can be cleaned with special cleaning agents (or other solvents such as alcohol).

Packaging

Packaging
1:1 double plastic bottle packaging: 600 ml per group; 9 groups per carton

Transport transmission
This product is non-hazardous and can be transported by train, car, ship and plane

Store
Can be stored for 6 months in a cool, ventilated and dry place.

Precautions and precautions
The initial 20g of mixed glue may be insufficiently mixed and is not recommended.
The glue mixed at room temperature should be used during the application period.
Avoid contact with skin and eyes. If inadvertently, rinse immediately with plenty of water and consult a doctor if necessary;
avoid contact with children; do not contaminate food, medicine or cosmetics.
The heavy workpiece to be bonded should be avoided to move before it is completely cured, and measures should be taken to fix it when it is necessary to move.
Recommended use conditions: temperature 15 ~ 35C, relative humidity 40% ~ 80%; if the temperature and humidity are lower than the recommended lower limit, the horn glue will cure more slowly, and if it is higher than the recommended upper limit, the construction time will be shortened.