MF1601 fabricated building sealant silicon modified polyether
MF1601 fabricated building polyether-modified silicone sealant is a one component, room temperature curing sealant neutral. The product does not contain toxic and hazardous substances, environmental pollution, has good bonding ability to most construction materials glass, aluminum, stone, concrete, cement, etc., it can be widely used in a variety of building housing industry interior caulk seal , building materials, an adhesive, and other fields. Having a low modulus and good set characteristics, can be well adapted to the displacement of cement concrete joints.
Product Description
Features and Benefits features and advantages of environmental protection: the VOC low, non-toxic, odorless, non-polluting to the substrate, no corrosion; coating surface: The surface of the dry sprayable paint color;
Good operability: Single component, easy to operate, can be directly extruded direct construction glue gun;
Excellent adhesion: excellent adhesion to most building materials aluminum, stone, concrete and so on;
Displacement capacity of 20, the normal stretching and shearing deformation of the internal construction joints, the product performance can be maintained unchanged, play an effective role in the sealing and bonding.
Color
In addition to black, white, gray, also negotiate special colors produced according to customer requirements
Standard Adopt Standard
MF1601 fabricated building polyether-modified silicone sealant meet or exceed the following standards:
GB / T 14683 2OLM-R
Composition
single component, neutral, room temperature moisture curable silicon modified polyether sealant.
Application Application
building interior door frames, window sills, and other interior parts of the sealing seal;
variety of building materials and interior parts of the binder, such as bonded aluminum, concrete and the like, kitchen mirrors, pendant adhesive;
Other suitable bonding and sealing applications for this product art construction.
Application Method
Before using this product, the operator must carefully read the product safety data sheets.
Surface must be clean, dry and free of dirt, water stains, frost, surface dirt, residual sealant.
In both construction surface protective tape affixed using a suitable sealing material in the gasket.
Beak incision size as needed, and should be filled continuously extruded into the interface, the amount of sizing adhesive should meet in full contact with the sealing surface.
When the sealant has not been surface crust, a suitable sealant strength flattened onto the backing material and the joint surface, and removing the protective tape.
Construction and curing process should maintain good ventilation.
To ensure optimal bonding effect, before the start of the project should be carried out adhesion tests must be compatible with the primer used when necessary. Peel adhesion testing should be carried out regularly in the construction process to ensure construction quality.
Storage and Validity
Well-packaged product in a cool, ventilated, dry place can be stored for 12 months in product packaging "valid" before use
Packaging
Plastic tubes: Each 300ml, flexible packaging carton 25: Each 600ml, carton 20
Limitations Use Restriction
The use of glass inserts should be used;
Not for non-ventilated place, because the sealant needs to absorb water from the air in the air cured;
Not for the places under water or humid surface;
Not for leaking grease, plasticizer or solvent materials, such as oil-soaked wood surface;
Should not be used polypropylene, polyethylene, polytetrafluoroethylene bonding;
The material surface temperature is below 5 ºC or above 40 ºC, not construction;
When using light colored sealant, should avoid contact with acidic or alkaline substances (e.g., wall cleaning liquid), in order to avoid discoloration.
Bonding cement, concrete substrate when the substrate must be completely dry before construction and conservation of 7 days, otherwise it will affect bonding properties.
Audited Supplier 
){kind=link}
){kind=link}