DJ-A3-MF889F fireproof sealant
Excellent fire and flame retardant performance; 2. Neutral curing, no corrosion to the surface to be adhered, suitable for coating glass, float glass, wooden materials, aluminum profiles, galvanized steel plates, masonry and other materials; 3 , The original joint width can be stretched/compressed by 20%; 4. Excellent weather resistance and good temperature resistance, sunlight, rain, ice, snow, ozone or extreme temperatures will not cause adverse effects; 5. Most buildings Materials and components can achieve good adhesion without primer; 6. It is an ideal sealing material for stretching, connecting, peripheral sealing and other moving joints; 7. Easy to use, it can be extruded at any time with a general glue gun ; 8. Excellent anti-sag performance; 9. No pollution to the environment.
Features and advantages
Excellent fire and flame retardant performance
Neutral curing, no corrosion to the surface to be adhered, suitable for coating glass, float glass, wood materials, aluminum profiles, galvanized steel plates, masonry and other materials
Can stretch/compress the original seam width by 20%
Excellent weather resistance and good temperature resistance, sunlight, rain, ice, snow, ozone or extreme temperature will not cause adverse effects
For most building materials and components, good adhesion can be achieved without primer
It is an ideal sealing material for stretching, connecting, peripheral sealing and other moving joints. It is easy to use and can be extruded at any time with a general glue gun.
Excellent anti-sag performance
No pollution to the environment
composition
One-component, neutral, room temperature moisture curing silicone sealant.
application
DJ-A3-MF889F is suitable for bonding and sealing of all kinds of fireproof doors and windows, flame-retardant sealing of all layers of curtain wall engineering, and flame-retardant sealing of public places such as waterproof, moisture-proof and decoration.
product manual
DJ-A3-MF889F is a one-component, non-sagging, room temperature curing sealant, which has the dual functions of fire-retardant and weather-resistant bonding and sealing. It can be easily squeezed out under most of the ambient temperature, and can be cured by reacting with the moisture in the air to form a weather-resistant, fire-retardant silicone sealant.
colour
In addition to black, gray and white, it can also be produced in consultation according to the special colors required by customers
Adopt standard
DJ-A3-MF889F meets or exceeds the following standards and specifications:
GB/T 24267 SR 20HM
GB/T 14683 G, F 20HM
ASTMC920 S type, NS type, 20 grade, suitable for NT, G,
Class A application
ISO 11600 F, G 20HM
Excellent adhesion to a wide range of substrates including coated, enamelled and reflective glasses, anodised and polyester paint coated aluminium and stainless steel.
Excellent temperature stability: - 60°C t 1ao0c.
High level of mechanical properties.
High elasticity and high modulus.
Resistant to ozone.
| TEST ITEMS |
TEST RESULTS |
TESTS1ANDARD |
| Base |
Polyisobutylene (PIB) |
- |
| Color |
Black |
- |
| Appearance |
Solid mass |
GB/T 1033.1 |
| Density |
1.1/1.25 fe/cm3] |
JC/T914 |
| Shear Strength |
0.21 MPa |
|
| Penetration (1 /1 Omm) |
25°C 40 |
|
| 130°C 290 |
JC/T 914 |
| Volatile Content |
Max. 0.02 % |
|
| Fogging |
Without visual fogging |
- |
| Moisture Vapour Transmission Rate (MVTR) |
0.26 [gr/m2.24hrs. 2mm] |
EN1279-4 |
| Gas Permeation Rate (Ar) |
1.30x10-3[gi7m2. hrs] |
EN1279-4 |
.APPLICATION FIELD
- One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
- It can keep its plastic and sealing properties in a wide temperature range.
- Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
- Minimum moisture vapour and gas permeation.
- Excellent temperature stability: - 30°C to 80°C.
PACKAGING
A: 265KG B: 19KG
MF881R is a two-component, neutral room temperature curing silicone structural sealant. It has excellent flame retardancy, UV resistance and weather resistance. It can be used for the second sealing of hot mirror insulating glass.
It can be used at 10ºC~50ºC, and it has good adhesion to glass, ceramics, metal, hot mirror film and other materials
Neutral fast curing, no corrosion to the adhered surface
Good resistance to high and low temperature, keep good performance at -60ºC~200ºC
Excellent flame retardancy
No pollution to the environment
Excellent weather resistance and UV aging resistance
According to standards: GB 16776, GB/T 2406, GB/T 2408
Packing specification: MF881R heat mirror insulating glass special structural sealant A component and B component are provided in a 12:1 mass ratio.
Big drum packaging: A component 200L iron drum
B component 20L plastic bucket
Medium drum packaging: A 20L plastic drum
310ml plastic tube for component B
Hot mirror hollow glass is composed of two layers of glass and a special hot mirror film, and is separated into a double cavity hollow structure by double-layer special spacers.
Features:
Heat insulation and high efficiency shielding of ultraviolet rays
High light transmittance to prevent condensation
Efficient sound insulation, energy saving and environmental protection
APPLICABLE STANDARDS
EU Specification: EN1279 - part1, 2, 4, 6
China Specification: GB29755, JC/T471.
IGCC-IGMA Approved.
SHELF LIFE AND STORAGE
12 months from the date of production below 30°C.
The well-packaged product can be stored for 12 months in a cool, ventilated, and dry place, and used before the "expiry date" of the outer packaging of the product
Application method
Surface cleaning
Remove all the grease, dust, water stains, frost, surface dirt, residual sealant, glass assembly accessories, protective coatings and other impurities and contaminants left in the joints and assembly parts.
Glue injection
Install backing materials, spacers, spacers and tapes as required. Masking tape should be used in the area connected to the seam to ensure a neat and beautiful sealant line.
For the surface of non-porous materials, there is usually no need to coat the primer to have good adhesion, but for some porous material surfaces, it may be necessary to coat the surface to ensure good adhesion. It is recommended to do the adhesion before the project starts. Result test.
Continuously squeeze DJ-A3-MF889F into and fill up the joints (sealant can be applied with pneumatic glue gun and other glue injection equipment). When using a pneumatic gun, the operating pressure should be adjusted to prevent bubbles from being generated during glue injection.
When the surface of the sealant is not yet skinned, flatten the sealant with appropriate strength
On the backing material and the surface of the joint, and smooth the surface of the sealant.
After leveling, remove the masking tape immediately. Do not use liquids such as water, soapy water, or alcohol to help level it.
Operation precautions
If it gets into the eyes accidentally, rinse immediately with plenty of water
Do not contact with skin for a long time, avoid contact with children
Do not contaminate food, drugs or cosmetics
Before use, please do a bonding test and refer to the company's technical data and safety data sheet to learn about the safe use and hazards of the product. All safety items not involved in this product, please follow the requirements of JGJ 102
Storage and validity period
The packaged product can be stored for 9 months in a cool, ventilated and dry place, and used before the "expiry date" of the outer packaging
package
Plastic tube: 300ml per tube, 25 tubes per box
Flexible packaging: 592ml per strip, 20 strips per box
Use restrictions
This product is not allowed to be used as a structural adhesive, nor has it been tested or stated as suitable
For medical or medicinal purposes.
This product is not suitable for:
Joints in groundwater or places subject to excessive friction
Long-term immersion in water
On the surface of building materials that may seep oil, plasticizer, solvent, or partially vulcanized rubber gasket or tape
On frosty or wet surfaces
Places that are completely inaccessible to air during curing (the sealant needs to be cured by moisture)
The application of paint on the surface of the sealant (generally paint cannot adhere to the surface of silicone)
Direct contact with food or other food-grade surface applications
){kind=link}