MF1501 Epoxy Folding Adhesive
MF1501 Epoxy Hemming Adhesive is a one-component, heat-curing, toughened and modified epoxy structural adhesive. It has good willfulness, mechanical strength and durability. It has good properties on oily, non-oily steel and galvanized steel. The bonding performance.
Excellent adhesion to a wide range of substrates including coated, enamelled and reflective glasses, anodised and polyester paint coated aluminium and stainless steel.
Excellent temperature stability: - 60°C t 1ao0c.
High level of mechanical properties.
High elasticity and high modulus.
Resistant to ozone.
| TEST ITEMS |
TEST RESULTS |
TESTS1ANDARD |
| Base |
Polyisobutylene (PIB) |
- |
| Color |
Black |
- |
| Appearance |
Solid mass |
GB/T 1033.1 |
| Density |
1.1/1.25 fe/cm3] |
JC/T914 |
| Shear Strength |
0.21 MPa |
|
| Penetration (1 /1 Omm) |
25°C 40 |
|
| 130°C 290 |
JC/T 914 |
| Volatile Content |
Max. 0.02 % |
|
| Fogging |
Without visual fogging |
- |
| Moisture Vapour Transmission Rate (MVTR) |
0.26 [gr/m2.24hrs. 2mm] |
EN1279-4 |
| Gas Permeation Rate (Ar) |
1.30x10-3[gi7m2. hrs] |
EN1279-4 |
.APPLICATION FIELD
- One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
- It can keep its plastic and sealing properties in a wide temperature range.
- Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
- Minimum moisture vapour and gas permeation.
- Excellent temperature stability: - 30°C to 80°C.
PACKAGING
A: 265KG B: 19KG
MF881R is a two-component, neutral room temperature curing silicone structural sealant. It has excellent flame retardancy, UV resistance and weather resistance. It can be used for the second sealing of hot mirror insulating glass.
It can be used at 10ºC~50ºC, and it has good adhesion to glass, ceramics, metal, hot mirror film and other materials
Neutral fast curing, no corrosion to the adhered surface
Good resistance to high and low temperature, keep good performance at -60ºC~200ºC
Excellent flame retardancy
No pollution to the environment
Excellent weather resistance and UV aging resistance
According to standards: GB 16776, GB/T 2406, GB/T 2408
Packing specification: MF881R heat mirror insulating glass special structural sealant A component and B component are provided in a 12:1 mass ratio.
Big drum packaging: A component 200L iron drum
B component 20L plastic bucket
Medium drum packaging: A 20L plastic drum
310ml plastic tube for component B
Hot mirror hollow glass is composed of two layers of glass and a special hot mirror film, and is separated into a double cavity hollow structure by double-layer special spacers.
Features:
Heat insulation and high efficiency shielding of ultraviolet rays
High light transmittance to prevent condensation
Efficient sound insulation, energy saving and environmental protection
Features
Single component, heat curing
No smell, environmental protection
Good thixotropy, excellent construction performance, good sag resistance
Good toughness, bonding performance, durability
use
MF 1501 Epoxy Hemming Adhesive is used for bonding the lap joints of the inner and outer plates of the door, engine cover, trunk (door) cover, etc. during the welding process of automobiles.
Instructions for use
1. Foreseeable matters
Before use, the bonding material should be tested for adhesion.
2. Construction
The bonded seal should be less oily, dry and free of corrosion.
Use a glue injection gun or glue injection machine to hit the product in a strip shape on the surface to be bonded, and assemble it with the inner board by wrapping and spot welding. If mechanical glue injection is used, the minimum recommended compression ratio of glue coating is 48:1; this product is generally only applied to a steel plate, and the rubber strip is 2mm~5mm wide. After bonding the two parts, they can be spot welded immediately.
When the construction environment temperature is low in winter, the viscosity of this product will increase, which may cause difficulty in glue injection. It is recommended
Use the pre-heating method for this product before construction, the heating temperature should not exceed 45C, and the cumulative heating time should not exceed 8h.
3. Clean
The uncured glue during construction can be removed with a clean cloth with alcohol, and the cured glue can be removed mechanically.
Store
Can be stored for 6 months in a cool and dry place at 10C ~ 20C
package
400g/piece, 20kg/drum, 200kg/drum
transport
MF1501 Epoxy Hemming Adhesive is non-dangerous and can be transported by train, car, ship, and airplane.
){kind=link}