Mf 882 Two Component Silicone Sealant for Insulating Glass -Igma/Igcc Listed

• Customization: Available
• Capacity: 600ml
• Color: White
• Model NO.: MF882
• Drying Time: 24 Hours
• Material: Composite Materials
• Usage: Construction, Industrial
• Certificate: Ift, Igma/Igcc
• Delivery Time: 7 Days
• Type: Silicone Sealant
• State: Fluid
• Mildew Proof: Mildew Proof
• Bonding Material: Glass
• Seal Tape Kind: Organic Material
• Seal Tape Usage: Architecture
• Transport Package: Barrel
• Specification: 200 l, 18 l, 20 l, 310 ml
• Trademark: SILANDE
• Origin: China
• HS Code: 3506919010
• Production Capacity: 50000PCS/Years
• Package Size: 21.00cm * 14.00cm * 18.00cm
• Package Gross Weight: 6.500kg
• Lead Time: 1 days (1 - 6000 ml) ; 3 days (6001 - 60000 ml) ; To be negotiated ( > 60000 ml)

Product Description

SILANDE MF882 is a two-		• Excellent adhesion to a wide range of
component neutral cured		substrates including coated, enamelled
silicone sealant	specifically	and reflective glasses, anodised	and
developed for the manufacturing		polyester paint coated aluminium	and
of insulating glass units used for		stainless steel.
window and door,	vehicles and	• Excellent temperature stability: - 60°C to
refrigeration, also	can be used	180°C.
for edge frame	curtain wall	• High level of mechanical properties.
system.		• High elasticity and high modulus.
		• Resistant to ozone.
TYPICAL PROPERTIES
	TEST ITEMS	MEASURED VALUE
Base	Appearance	White / Grey Ropy Paste
(Com A)	Viscosity	150,000 mPa.S
Catalyst	Appearance	Black / White Ropy Paste
(Com B)	Viscosity	80,000 mPa.S
Mixture	Appearance	Black / White / Grey
By weight	Application Time (23°C, 50%)	30-50 mins
(A:B = 16:1)	Tack-free Time (23°C, 50%)	30-60 mins
	Placed Vertically (50°C)	0
	Placed Horizontal	No deformation
	Shore A - 4h	22
Hardness	Shore A - 24h	40
	Shore A-14 days	46
After 14 days at a temperature of 23°C and RH 50%.
Elastic Recovery		94%
Adhesion Property at Definite Elongation		No Damage
	23°C	0.92 MPa
	After Aging in Hot Air	1.10 MPa
Tensile	300 hr After Water-UV	0.82 MPa
Adhesion	-20°C	1.28 MPa
Strength	60°C	0.85 MPa
	After Water-UV Immersion	0.79 MPa
	Adhesive Failure Area	0%
Elongation under maximum tensile strength at 23°C 93%
	TGA	3.6%
Moisture Vapour Transmission Rate (MVTR)		12.3 [gr/m^2.24hrs.2mm] - EN1279/4
Gas Permeation Rate (Ar)		360 x 10-3 rgr/m^2.hrsl - EN1279/4

♦ APPLICATION INSTRUCTIONS

GLASS / SPACER - To achieve good adhesion, the glass/ spacer surface must be clean, dry and free of any residue.
SILANDE MF910H shall be applied at a temperature between 160 °C and 190 °C using appropriate extruders.

APPLICABLE STANDARDS• EU Specification: EN1279 - part 4
SHELF LIFE AND STORAGE24 months stored in cool, dry and ventilated places.

PACKAGING

Glue injection
As shown in Figure 1, install the cushion material, spacer spacer and masking tape. Continuously squeeze DJ-A3-MF899F into and fill the joints. Flatten the sealant on the gasket material and the surface of the joint with an appropriate force. The finishing process must be done at one go after the injection is completed and the surface is not skinned.It is recommended to use convex tools to trim the rubber surface into a concave shape, and soapy water should not be used as an auxiliary material for trimming. After the trimming is completed, immediately tear off the masking tape. On the glass assembly, the sealant injected on the bottom seam must be trimmed to a bevel to prevent water accumulation. Uncured sealant is never allowed to come in contact with non-grindable surfaces, such as polished marble, metal or glass surfaces, because excess sealant cannot be completely removed with organic or chlorinated solvents. Therefore, these surfaces must be covered, or extra care must be taken when injecting glue to prevent the sealant from contacting these surfaces. Once the uncured sealant touches these surfaces, it will leave a film on the surface, which will affect the unique aesthetics of the substrate.

 

TEST ITEMS	TEST RESULTS	TESTS1ANDARD
Base	Polyisobutylene (PIB)	-
Color	Black	-
Appearance	Solid mass	GB/T 1033.1
Density	1.1/1.25 fe/cm^3]	JC/T914
Shear Strength	0.21 MPa
Penetration (1 /1 Omm)	25°C 40
	130°C 290	JC/T 914
Volatile Content	Max. 0.02 %
Fogging	Without visual fogging	-
Moisture Vapour Transmission Rate (MVTR)	0.26 [gr/m^2.24hrs. 2mm]	EN1279-4
Gas Permeation Rate (Ar)	1.30x10-^3[gi7m^2. hrs]	EN1279-4

.APPLICATION FIELD

• One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
• It can keep its plastic and sealing properties in a wide temperature range.
• Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
• Minimum moisture vapour and gas permeation.
• Excellent temperature stability: - 30°C to 80°C.

♦ TECHNICAL DATA - TYPICAL PROPERTIES
MF322 two-component polyurethane corner glue
Mainly used for bonding and sealing between aluminum alloy corners and profile cavities in aluminum alloy door and window structures; suitable for bonding wooden doors, windows and doors; for processed different materials, such as wood, building materials, ceramics and metals It has good adhesion.
How to use instructions
Remove dirt, dust, oil, frost, etc. on the surface of the substrate; place the plastic nozzle on the open bottle mouth and tighten it, and use a dedicated 1:1 double bottle glue gun to inject glue. Uncured glue can be cleaned with special cleaning agents (or other solvents such as alcohol).

Packaging

Packaging
1:1 double plastic bottle packaging: 600 ml per group; 9 groups per carton

Transport transmission
This product is non-hazardous and can be transported by train, car, ship and plane

Store
Can be stored for 6 months in a cool, ventilated and dry place.

Precautions and precautions
The initial 20g of mixed glue may be insufficiently mixed and is not recommended.
The glue mixed at room temperature should be used during the application period.
Avoid contact with skin and eyes. If inadvertently, rinse immediately with plenty of water and consult a doctor if necessary;
avoid contact with children; do not contaminate food, medicine or cosmetics.
The heavy workpiece to be bonded should be avoided to move before it is completely cured, and measures should be taken to fix it when it is necessary to move.
Recommended use conditions: temperature 15 ~ 35C, relative humidity 40% ~ 80%; if the temperature and humidity are lower than the recommended lower limit, the horn glue will cure more slowly, and if it is higher than the recommended upper limit, the construction time will be shortened.