MF1602 fabricated building sealant silicon modified polyether
MF1602 fabricated building polyether-modified silicone sealant is a one component, room temperature curing sealant neutral. The product does not contain toxic and hazardous substances, environmental pollution, has good bonding ability to most construction materials aluminum, stone, concrete, etc., can be widely used in a variety of building facades housing industry caulk seal, fill the room seam seal, doors and windows, building materials, an adhesive, and other fields. Having a low modulus and good set characteristics, can be well adapted to concrete joint displacement, and has excellent resistance to weather performance.
Product Description
Features and Benefits
Environmental: the VOC low, non-toxic, odorless, non-polluting to the substrate, no corrosion; coating surface: The surface of the dry sprayable paint color;
Good operability: Single component, easy to operate, can be directly extruded direct construction glue gun;
Excellent adhesion: excellent adhesion to most building materials aluminum, stone, concrete and so on;
Displacement capacity of 20, having a low modulus and good set characteristics,
Concrete joints can be well adapted to the displacement, and has excellent resistance to weather performance.
Excellent adhesion to a wide range of substrates including coated, enamelled and reflective glasses, anodised and polyester paint coated aluminium and stainless steel.
Excellent temperature stability: - 60°C t 1ao0c.
High level of mechanical properties.
High elasticity and high modulus.
Resistant to ozone.
| TEST ITEMS |
TEST RESULTS |
TESTS1ANDARD |
| Base |
Polyisobutylene (PIB) |
- |
| Color |
Black |
- |
| Appearance |
Solid mass |
GB/T 1033.1 |
| Density |
1.1/1.25 fe/cm3] |
JC/T914 |
| Shear Strength |
0.21 MPa |
|
| Penetration (1 /1 Omm) |
25°C 40 |
|
| 130°C 290 |
JC/T 914 |
| Volatile Content |
Max. 0.02 % |
|
| Fogging |
Without visual fogging |
- |
| Moisture Vapour Transmission Rate (MVTR) |
0.26 [gr/m2.24hrs. 2mm] |
EN1279-4 |
| Gas Permeation Rate (Ar) |
1.30x10-3[gi7m2. hrs] |
EN1279-4 |
.APPLICATION FIELD
- One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
- It can keep its plastic and sealing properties in a wide temperature range.
- Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
- Minimum moisture vapour and gas permeation.
- Excellent temperature stability: - 30°C to 80°C.
PACKAGING
A: 265KG B: 19KG
MF881R is a two-component, neutral room temperature curing silicone structural sealant. It has excellent flame retardancy, UV resistance and weather resistance. It can be used for the second sealing of hot mirror insulating glass.
It can be used at 10ºC~50ºC, and it has good adhesion to glass, ceramics, metal, hot mirror film and other materials
Neutral fast curing, no corrosion to the adhered surface
Good resistance to high and low temperature, keep good performance at -60ºC~200ºC
Excellent flame retardancy
No pollution to the environment
Excellent weather resistance and UV aging resistance
According to standards: GB 16776, GB/T 2406, GB/T 2408
Packing specification: MF881R heat mirror insulating glass special structural sealant A component and B component are provided in a 12:1 mass ratio.
Big drum packaging: A component 200L iron drum
B component 20L plastic bucket
Medium drum packaging: A 20L plastic drum
310ml plastic tube for component B
Hot mirror hollow glass is composed of two layers of glass and a special hot mirror film, and is separated into a double cavity hollow structure by double-layer special spacers.
Features:
Heat insulation and high efficiency shielding of ultraviolet rays
High light transmittance to prevent condensation
Efficient sound insulation, energy saving and environmental protection
Colour
In addition to black, white, gray, also negotiate special colors produced according to customer requirements.
Standard
MF1602 fabricated building polyether-modified silicone sealant meet or exceed the following standards:
GBT 14683 2OLM-R
Composition
Single component, neutral, room temperature moisture curable silicon modified polyether sealant.
Application
Prefabricated concrete buildings various doors and windows and seal interior and exterior sealing; building interior door frames, window sills, and other interior parts of the sealing seal;
Various building materials and interior parts of the binder, such as bonded aluminum, concrete and the like, kitchen mirrors, pendant adhesive;
Other suitable art construction adhesive and sealing applications for this product.
Application method
Before using this product, the operator must carefully read the product safety data sheets. Surface must be clean, dry and free of dirt, water stains, frost, surface dirt, residual sealant.
In both construction surface protective tape affixed using a suitable sealing material in the gasket.
Beak incision size as needed, and should be filled continuously extruded into the interface, the amount of sizing adhesive should meet in full contact with the sealing surface.
When the sealant has not been surface crust, a suitable sealant strength flattened onto the backing material and the joint surface, and removing the protective tape. Construction and curing process should maintain good ventilation.
To ensure optimal bonding effect, before the start of the project should be carried out adhesion tests must be compatible with the primer used when necessary. Peel adhesion testing should be carried out regularly in the construction process to ensure construction quality.
Storage and Validity
Well-packaged product in a cool, ventilated, dry place can be stored for 12 months in product packaging "valid" before use.
Package
Plastic tubes: Each 300ml, flexible packaging carton 25: Each 6O0ml, carton 20
Limitations
The use of glass inserts should be used;
Not for non-ventilated place, because the sealant needs to absorb water from the air in the air cured;
Not for the places under water or humid surface;
Not for leaking grease, plasticizer or solvent materials, such as oil-soaked wood surface;
Should not be used polypropylene, polyethylene, polytetrafluoroethylene bonding;
The material surface temperature is below 5 ºC or above 40 ºC, not construction;
When using light colored sealant, should avoid contact with acidic or alkaline substances (e.g., wall cleaning liquid), in order to avoid discoloration.
Bonding cement, concrete substrate when the substrate must be completely dry before construction and conservation of 7 days, otherwise it will affect bonding properties.
Safety Tips
This product is not completely cured after toxic, but before curing should avoid contact with the eyes, when contact with the eyes, flush with water, and seek medical treatment; uncured product should avoid contact with children.
Technical Services
Provide complete information technology products.
Adhesion test, compatibility test.
The company can provide pollution testing laboratory for the customer, the customer can choose the projects substrate by mail (or other form) to us, the company will carry out the pollution testing, and issue a written test report
){kind=link}