Thermoplastic Sealant for Insulating Glass

• Customization: Available
• Capacity: 600ml
• Color: White
• Model NO.: MF910SG
• Material: Composite Materials
• Usage: Industrial
• Dilivery: 7-10 Days
• Type: Silicone Sealant
• State: Fluid
• Mildew Proof: Mildew Proof
• Bonding Material: Glass
• Seal Tape Kind: Organic Material
• Seal Tape Usage: Architecture
• Transport Package: Drum
• Specification: 190L 30kg
• Trademark: SILANDE
• Origin: China
• HS Code: 3506919010
• Production Capacity: 8000000PCS/Year
• Package Size: 21.00cm * 14.00cm * 18.00cm
• Package Gross Weight: 6.500kg
• Lead Time: 1 days (1 - 6000 ml) ; 3 days (6001 - 60000 ml) ; To be negotiated ( > 60000 ml)

Product Description

 

MF910SG Thermoplastic spacer for insulating glass
MF910SG is a thermoplastic warm edge spacer for insulating glass. MF910SG is composed of a thermoplastic elastomer containing a desiccant, which is used to dry the air in the cavity of two hollow glass units.
product manual
MF910SG is a thermoplastic warm-edge spacer for insulating glass. MF910SG is composed of a thermoplastic elastomer containing a desiccant, which is used to dry the air in the cavity of two hollow glass units.
Instructions for use
Clean and dry the bonding surface to remove dust, oil and grease. MF910SG is coated with a special hot-melt J-based extruder for the hollow glass production line. The specific use conditions can be achieved by adjusting the temperature and pressure. The extrusion temperature range is 120C ~ 140C, and the ambient temperature during construction should not be lower than 18°C.

Precautions
Before construction, please read the instructions, safety data sheets, and packaging labels carefully to obtain information on safe use and health hazards. Note: When using this hot melt adhesive or any other hot melt sealant, proper care should be taken to avoid burns. .

Use range
MF910SG is mainly used in the production of insulating glass with structural assembly. It can be used in conjunction with the company's production components of polysulfide sealant and silicone sealant to complete double sealing. Double made with this product .Sealed insulating glass meets the requirements of GB/T1 1944.
package
Iron drum packing: 220kg (φ571.5mm) / drum

Store
Best storage conditions: a cool, ventilated and dry place, storage period: 12 months (unopened packaging drum)

transport
MF910SG is non-hazardous and can be transported by train, car, ship and airplane.

Important description
The above-mentioned relevant parameters of this product, especially the relevant hints about the application, are put forward on the basis of our test and experience. Due to the different materials and application conditions, we recommend that you complete the necessary tests before use to ensure that our products can be better used.
One-component, neutral, room temperature moisture curing silicone sealant. 1. Excellent flame-retardant performance, long time for fire blocking. 2. High elasticity and low modulus. It can be used with silicone fire-proof smoldering structural sealant that meets ETAG002 standard to provide 25-year quality guarantee. 3. Excellent resistance High and low temperature performance and weathering resistance performance 4. Neutral curing, no corrosion to the surface to be adhered 5. Good adhesion to most building materials and components without primer 6. It is stretching, connecting, and surrounding Ideal sealing material for sealing and fire blocking 7. Easy to use, it can be extruded at any time with a general glue gun. 8. Ring alignment
 

• The well-packaged product can be stored for 12 months in a cool, ventilated, and dry place, and used before the "expiry date" of the outer packaging of the product
   

  TEST ITEMS	TEST RESULTS	TESTS1ANDARD
  Base	Polyisobutylene (PIB)	-
  Color	Black	-
  Appearance	Solid mass	GB/T 1033.1
  Density	1.1/1.25 fe/cm^3]	JC/T914
  Shear Strength	0.21 MPa
  Penetration (1 /1 Omm)	25°C 40
  	130°C 290	JC/T 914
  Volatile Content	Max. 0.02 %
  Fogging	Without visual fogging	-
  Moisture Vapour Transmission Rate (MVTR)	0.26 [gr/m^2.24hrs. 2mm]	EN1279-4
  Gas Permeation Rate (Ar)	1.30x10-^3[gi7m^2. hrs]	EN1279-4

  .APPLICATION FIELD

  • One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
  • It can keep its plastic and sealing properties in a wide temperature range.
  • Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
  • Minimum moisture vapour and gas permeation.
  • Excellent temperature stability: - 30°C to 80°C.

  ♦ TECHNICAL DATA - TYPICAL PROPERTIES
  MF322 two-component polyurethane corner glue
  Mainly used for bonding and sealing between aluminum alloy corners and profile cavities in aluminum alloy door and window structures; suitable for bonding wooden doors, windows and doors; for processed different materials, such as wood, building materials, ceramics and metals It has good adhesion.
  How to use instructions
  Remove dirt, dust, oil, frost, etc. on the surface of the substrate; place the plastic nozzle on the open bottle mouth and tighten it, and use a dedicated 1:1 double bottle glue gun to inject glue. Uncured glue can be cleaned with special cleaning agents (or other solvents such as alcohol).
  
  Packaging

  

  

  Packaging
  1:1 double plastic bottle packaging: 600 ml per group; 9 groups per carton
  
  Transport transmission
  This product is non-hazardous and can be transported by train, car, ship and plane
  
  Store
  Can be stored for 6 months in a cool, ventilated and dry place.
  
  Precautions and precautions
  The initial 20g of mixed glue may be insufficiently mixed and is not recommended.
  The glue mixed at room temperature should be used during the application period.
  Avoid contact with skin and eyes. If inadvertently, rinse immediately with plenty of water and consult a doctor if necessary;
  avoid contact with children; do not contaminate food, medicine or cosmetics.
  The heavy workpiece to be bonded should be avoided to move before it is completely cured, and measures should be taken to fix it when it is necessary to move.
  Recommended use conditions: temperature 15 ~ 35C, relative humidity 40% ~ 80%; if the temperature and humidity are lower than the recommended lower limit, the horn glue will cure more slowly, and if it is higher than the recommended upper limit, the construction time will be shortened.