CHICO Brand Adsorbent for insulating glass fully cover the current requirement of EN1279-4 and 6, it not only technical can meet the requirement of EN1279 but also it can save money for the end-users in the parameters of lower density , higher adsorption capacity and also it will safeguard your IG unit in the ideal way together with other insulating glass components-Primary sealant, Secondary sealant, and Spacer bar.
Advantage
The effective adsorption capacity of our products is 20 times that of clay hollow desiccants
The average service life of our products is 8 times that of 4A molecular sieve hollow desiccant
---1012 unit.
--- -40ºC,15%.
---33ºC,20-8ºC.
--- 950ºC,2%.
---98%.
Low powder drop-less than 12 unit of powder drop per 10 grams.
High adsorption---At the dew point of -40ºC, it can still maintain 15% adsorption capacity.
High temperature rise---over 33ºC, to ensure the dew point life of insulating glass of more than 20 years -8ºC
Low water content --- Loss on ignition at 950ºC, water content is less than 2%.
Uniform particle size---The qualified rate of particle size is above 98%.
Green energy molecular sieve has uniform particle size, and the qualified rate of molecular sieve particle size exceeds 99.99%
After the Size Ratio of the IFT Natergy Sieve has the
Size Ratio value of 99.99%
Put the molecular sieve into it and stir. After the precipitation, the water quality is still clear.
"at the end of the test, no dust has been identified"
-Cited from the IFT test report (No.:509 32060/3e)
The temperature rise value of green energy molecular sieve exceeding 50ºC (25g/25ml H2O) enables the insulating glass to reach a continuous service life of more than 10 years.
The Natergy Sieve has the Delta T value over 50ºC, it
gives your insulating glass deep dehydrated air for
long-lasted working span.
Please refer to the parameters in the following:
| Item |
unit |
|
Bead |
|
| Diameter |
mm |
0.5-0.9 |
1.0-1.5 |
1.5-2.0 |
| Delta T |
ºC |
≥35 |
≥35 |
≥35 |
Static H2O adsorption
(10%RH,@25C) |
% wt |
≥16 |
≥16 |
≥16 |
| Bulk Density |
g/ml |
≥0.75 |
≥0.75 |
≥0.75 |
| Particle ratio |
% |
≥98 |
≥98 |
≥98 |
| Gas Desorption |
Ml/g |
≤0.28 |
≤0.28 |
≤0.28 |
| Loss on Ignition(540C) |
% wt |
≤1.5 |
≤1.5 |
≤1.5 |
CHICO, You reliable and Professional partner in IG field.
Audited Supplier 
){kind=link}