MF1509 silicon modified polyether sealant
MF1509 silicon modified polyether sealant is a one-component, solvent-free, room temperature moisture curing sealant. The product is green and environmentally friendly and does not contain toxic or harmful substances. It has excellent bonding performance, weather resistance, aging resistance and low temperature resistance, and will not corrode the adhered material.
Product superiority
Fast curing, low VOC, non-toxic and tasteless;
Excellent adhesion to metals, ceramics, wood, PVC, PC and other materials;
Excellent weather resistance, aging resistance, dielectric and mechanical properties;
The surface can be sprayed.
Scope of application
It can be used for bonding and sealing of motor vehicle bodies, structural parts, interiors, floors, and air-conditioning systems such as high-speed railways, high-speed trains, and automobiles. It can also be used for bonding and sealing in machinery, electronic appliances, ships and other fields.
Construction method
(1) Surface cleaning: To ensure that the sealant has good adhesion, please clean the surface of the material to be adhered with a clean, lint-free white cloth before use, to ensure that it is dry and free of grease, oil and dust.
(2) Construction: Manual or pneumatic glue gun can be used for direct extrusion construction. Good ventilation should be maintained during construction and curing.
(3) In order to ensure the best bonding effect, the bonding test should be carried out before batch use, and the peeling bonding test should be carried out regularly during the construction process to ensure the use effect.
Precautions
Before using this product, the operator must carefully read the product safety information
Data to ensure safe use.
Packaging Information
Hard packaging: 300ml/piece, 25 pieces per box
Flexible packaging: 600m/piece, 20 pieces per box
Data foundation
All the data stated in the product data sheet are obtained from laboratory tests. As the environment is beyond our control, the actual measured data may be different.
Health and safety information
Please read the product label or refer to the product safety data (SDS) before use.
store
The well-packaged product can be stored for 12 months in a cool, ventilated, and dry place, and used before the "expiry date" of the product packaging.
transport
This product is non-hazardous and can be transported by train, car, ship, etc.
One-component, neutral, room temperature moisture curing silicone sealant. 1. Excellent flame-retardant performance, long time for fire blocking. 2. High elasticity and low modulus. It can be used with silicone fire-proof smoldering structural sealant that meets ETAG002 standard to provide 25-year quality guarantee. 3. Excellent resistance High and low temperature performance and weathering resistance performance 4. Neutral curing, no corrosion to the surface to be adhered 5. Good adhesion to most building materials and components without primer 6. It is stretching, connecting, and surrounding Ideal sealing material for sealing and fire blocking 7. Easy to use, it can be extruded at any time with a general glue gun. 8. Ring alignment
-
The well-packaged product can be stored for 12 months in a cool, ventilated, and dry place, and used before the "expiry date" of the outer packaging of the product
| TEST ITEMS |
TEST RESULTS |
TESTS1ANDARD |
| Base |
Polyisobutylene (PIB) |
- |
| Color |
Black |
- |
| Appearance |
Solid mass |
GB/T 1033.1 |
| Density |
1.1/1.25 fe/cm3] |
JC/T914 |
| Shear Strength |
0.21 MPa |
|
| Penetration (1 /1 Omm) |
25°C 40 |
|
| 130°C 290 |
JC/T 914 |
| Volatile Content |
Max. 0.02 % |
|
| Fogging |
Without visual fogging |
- |
| Moisture Vapour Transmission Rate (MVTR) |
0.26 [gr/m2.24hrs. 2mm] |
EN1279-4 |
| Gas Permeation Rate (Ar) |
1.30x10-3[gi7m2. hrs] |
EN1279-4 |
.APPLICATION FIELD
- One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
- It can keep its plastic and sealing properties in a wide temperature range.
- Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
- Minimum moisture vapour and gas permeation.
- Excellent temperature stability: - 30°C to 80°C.
♦ TECHNICAL DATA - TYPICAL PROPERTIES
MF322 two-component polyurethane corner glue
Mainly used for bonding and sealing between aluminum alloy corners and profile cavities in aluminum alloy door and window structures; suitable for bonding wooden doors, windows and doors; for processed different materials, such as wood, building materials, ceramics and metals It has good adhesion.
How to use instructions
Remove dirt, dust, oil, frost, etc. on the surface of the substrate; place the plastic nozzle on the open bottle mouth and tighten it, and use a dedicated 1:1 double bottle glue gun to inject glue. Uncured glue can be cleaned with special cleaning agents (or other solvents such as alcohol).
Packaging
Packaging
1:1 double plastic bottle packaging: 600 ml per group; 9 groups per carton
Transport transmission
This product is non-hazardous and can be transported by train, car, ship and plane
Store
Can be stored for 6 months in a cool, ventilated and dry place.
Precautions and precautions
The initial 20g of mixed glue may be insufficiently mixed and is not recommended.
The glue mixed at room temperature should be used during the application period.
Avoid contact with skin and eyes. If inadvertently, rinse immediately with plenty of water and consult a doctor if necessary;
avoid contact with children; do not contaminate food, medicine or cosmetics.
The heavy workpiece to be bonded should be avoided to move before it is completely cured, and measures should be taken to fix it when it is necessary to move.
Recommended use conditions: temperature 15 ~ 35C, relative humidity 40% ~ 80%; if the temperature and humidity are lower than the recommended lower limit, the horn glue will cure more slowly, and if it is higher than the recommended upper limit, the construction time will be shortened.
){kind=link}