CHICO Brand Adsorbent for insulating glass fully cover the current requirement of EN1279-4 and 6, it not only technical can meet the requirement of EN1279 but also it can save money for the end-users in the parameters of lower density , higher adsorption capacity and also it will safeguard your IG unit in the ideal way together with other insulating glass components-Primary sealant, Secondary sealant, and Spacer bar.
Product characteristics
1. Low water content
Ultra-low packaging water content, can ensure that the desiccant has a strong water absorption energy.
2. Strong adsorption capacity
The super deep adsorption capacity can ensure that the water in the glass sandwich is fully absorbed, and avoid condensation to fully ensure the thermal insulation performance of the insulating glass.
3. Low flatness
Ultra-low powder drop, ensure the beautiful performance of insulating glass.
4. Low nitrogen adsorption capacity
The ultra-low nitrogen adsorption capacity prevents the insulating glass from distorting the glass under different temperature change conditions, leading to the glass burst.
5. The accumulation density is reasonable
Qualified accumulation density can ensure that the filling amount of desiccant is controlled within the most economical and reasonable range.
6. cid and alkaline reasonable
7. Reasonable acid and alkaline, ensure that the hollow glass interval bar is not easy to be corroded, salting out and other phenomena.
8. High compressive strength
High compressive strength, reduce the crushing in the filling process, slag, dust, pollution of glass.
9. Electrostatic low
Low static electricity, avoid the desiccant adsorption on the pipe wall during the machine filling, blocking the pipe.
10. Good product quality
To ensure the quality of products, only use 3A molecular sieve as raw material, do not add other categories of molecular sieve, will not cause hollow glass "breathing" phenomenon to damage the glass.
Please refer to the parameters in the following:
| Item |
unit |
|
Bead |
|
| Diameter |
mm |
0.5-0.9 |
1.0-1.5 |
1.5-2.0 |
| Delta T |
ºC |
≥35 |
≥35 |
≥35 |
Static H2O adsorption
(10%RH,@25C) |
% wt |
≥16 |
≥16 |
≥16 |
| Bulk Density |
g/ml |
≥0.75 |
≥0.75 |
≥0.75 |
| Particle ratio |
% |
≥98 |
≥98 |
≥98 |
| Gas Desorption |
Ml/g |
≤0.28 |
≤0.28 |
≤0.28 |
| Loss on Ignition(540C) |
% wt |
≤1.5 |
≤1.5 |
≤1.5 |
Audited Supplier 
){kind=link}