Solar Silicone Sealant for P V J-Box Self-Leveling Mf962 COM a and COM B

• Customization: Available
• Capacity: 600ml
• Color: Black
• Model NO.: MF962
• Drying Time: 24 Hours
• Material: Composite Materials
• Usage: Construction, Home Improvement, Industrial
• Type: Silicone Sealant
• State: Fluid
• Mildew Proof: Mildew Proof
• Bonding Material: Aluminum
• Seal Tape Kind: Organic Material
• Transport Package: Case
• Specification: 200L+310ML
• Trademark: SILANDE
• Origin: China
• HS Code: 3506919010
• Production Capacity: 8000000PCS/Year
• Package Size: 21.00cm * 14.00cm * 18.00cm
• Package Gross Weight: 6.500kg
• Lead Time: 1 days (1 - 6000 ml) ; 3 days (6001 - 60000 ml) ; To be negotiated ( > 60000 ml)

Product Description

MF962 Solar Silicone Sealant for PV J-box(Self-leveling)
Introduction:
Two component RTV silicone, condensation-type insulating potting material, no heat dissipation and no corrosion while curing, low shrinkage percentage, mainly applied for the potting of solar module junction box.
One-component, neutral, room temperature moisture curing silicone sealant. 1. Excellent flame-retardant performance, long time for fire blocking. 2. High elasticity and low modulus. It can be used with silicone fire-proof smoldering structural sealant that meets ETAG002 standard to provide 25-year quality guarantee. 3. Excellent resistance High and low temperature performance and weathering resistance performance 4. Neutral curing, no corrosion to the surface to be adhered 5. Good adhesion to most building materials and components without primer 6. It is stretching, connecting, and surrounding Ideal sealing material for sealing and fire blocking 7. Easy to use, it can be extruded at any time with a general glue gun. 8. Ring alignment
 

• The well-packaged product can be stored for 12 months in a cool, ventilated, and dry place, and used before the "expiry date" of the outer packaging of the product
   

  TEST ITEMS	TEST RESULTS	TESTS1ANDARD
  Base	Polyisobutylene (PIB)	-
  Color	Black	-
  Appearance	Solid mass	GB/T 1033.1
  Density	1.1/1.25 fe/cm^3]	JC/T914
  Shear Strength	0.21 MPa
  Penetration (1 /1 Omm)	25°C 40
  	130°C 290	JC/T 914
  Volatile Content	Max. 0.02 %
  Fogging	Without visual fogging	-
  Moisture Vapour Transmission Rate (MVTR)	0.26 [gr/m^2.24hrs. 2mm]	EN1279-4
  Gas Permeation Rate (Ar)	1.30x10-^3[gi7m^2. hrs]	EN1279-4

  .APPLICATION FIELD

  • One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
  • It can keep its plastic and sealing properties in a wide temperature range.
  • Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
  • Minimum moisture vapour and gas permeation.
  • Excellent temperature stability: - 30°C to 80°C.

  ♦ TECHNICAL DATA - TYPICAL PROPERTIES
  MF322 two-component polyurethane corner glue
  Mainly used for bonding and sealing between aluminum alloy corners and profile cavities in aluminum alloy door and window structures; suitable for bonding wooden doors, windows and doors; for processed different materials, such as wood, building materials, ceramics and metals It has good adhesion.
  How to use instructions
  Remove dirt, dust, oil, frost, etc. on the surface of the substrate; place the plastic nozzle on the open bottle mouth and tighten it, and use a dedicated 1:1 double bottle glue gun to inject glue. Uncured glue can be cleaned with special cleaning agents (or other solvents such as alcohol).
  
  Packaging

  

  

  Packaging
  1:1 double plastic bottle packaging: 600 ml per group; 9 groups per carton
  
  Transport transmission
  This product is non-hazardous and can be transported by train, car, ship and plane
  
  Store
  Can be stored for 6 months in a cool, ventilated and dry place.
  
  Precautions and precautions
  The initial 20g of mixed glue may be insufficiently mixed and is not recommended.
  The glue mixed at room temperature should be used during the application period.
  Avoid contact with skin and eyes. If inadvertently, rinse immediately with plenty of water and consult a doctor if necessary;
  avoid contact with children; do not contaminate food, medicine or cosmetics.
  The heavy workpiece to be bonded should be avoided to move before it is completely cured, and measures should be taken to fix it when it is necessary to move.
  Recommended use conditions: temperature 15 ~ 35C, relative humidity 40% ~ 80%; if the temperature and humidity are lower than the recommended lower limit, the horn glue will cure more slowly, and if it is higher than the recommended upper limit, the construction time will be shortened.

  

  

  

Features:
No staining to substrate surface.
Excellent fluidity and waterproof. No corrosion.
Great compatibility with EVA, PA and PPO.
Stability and flexibility over a wide temperature range.
Excellent resistance to harsh weather and humidity.
Usage:
1.Measurement: Precisely and fully mix part A/part B in a 6:1 ratio by weight to achieve full cure, and finally using up the gel within the application time. Attention: Delamination may occur on part A after a long-term placement, for which a prevention by stirring is available.
2.Stirring: Fully mix part A/part B in vessel, if possible, defoaming by vacuum pumping for 5 minutes. (Attention: for each time of stirring, the height of gel shall be the same height or below 1/2 of the vessel height, otherwise it may spill out while defoaming ).
3.Potting: Dispense the gel as soon as possible. Generally defoaming without vacuum pumping is available, however, potting after defoaming with vacuum pumping is advised to achieve high thermal conductivity.
4.Curing: Potting samples cure at room temperature. The processing moves on after primary curing. Usually it takes 3 hours for curing at room temperature, which varies respectively according to the variation of temperature. In general, curing is faster in the condition of high temperature in summer, conversely it is slower in winter.
Precautions:
1. Part B is easy to be hydrolyzed, for which a long time placement in air shall be avoided, and an instant sealing storage after usage is necessary.
2. A slight skin allergy may occur for some personnel after a long time contact with gel, which will lead to a mild suffering. Therefore, hand glove shall be equipped while working, and if accidental contact with skin happens, soap or detergent works effectively for cleaning.
3. Before using in batches, small quantities on trial come first, and a proficient master on methods of application to prevent mistakes is also necessary.
Main technical parameters:
Note: After 7 days' curing, all the values are measured in the temperature of (23±2)ºC and in the relative humidity of (50±5)%.
Package:
Part A:12kg/barrel
Part B:2kg/box, 8 boxes/case
Storage:
9 months stored in cool, dry and ventilated places below 27 ºC.
Using before the date of validity on the package.
Transportation:
Non-dangerous, can be transported by automobile, ship and train.