MF2030 Polyurethane Adhesive Special Activator
MF2030 special activator for polyurethane adhesive is a colorless to light yellow, moisture-curable liquid activator, specially used to treat the substrate surface of the polyurethane adhesive in the direct assembly method. MF2030 has stable performance and is applicable throughout the year. There are no special requirements for construction in winter. Using MF2030 can simplify the operation process, improve performance, and be safer to improve the quality of work. The surface dry quickly and the applicable temperature range makes it a suitable car product for all seasons. MF2030 is produced in accordance with the ISO9001/14001 quality system.
Excellent adhesion to a wide range of substrates including coated, enamelled and reflective glasses, anodised and polyester paint coated aluminium and stainless steel.
Excellent temperature stability: - 60°C t 1ao0c.
High level of mechanical properties.
High elasticity and high modulus.
Resistant to ozone.
| TEST ITEMS |
TEST RESULTS |
TESTS1ANDARD |
| Base |
Polyisobutylene (PIB) |
- |
| Color |
Black |
- |
| Appearance |
Solid mass |
GB/T 1033.1 |
| Density |
1.1/1.25 fe/cm3] |
JC/T914 |
| Shear Strength |
0.21 MPa |
|
| Penetration (1 /1 Omm) |
25°C 40 |
|
| 130°C 290 |
JC/T 914 |
| Volatile Content |
Max. 0.02 % |
|
| Fogging |
Without visual fogging |
- |
| Moisture Vapour Transmission Rate (MVTR) |
0.26 [gr/m2.24hrs. 2mm] |
EN1279-4 |
| Gas Permeation Rate (Ar) |
1.30x10-3[gi7m2. hrs] |
EN1279-4 |
.APPLICATION FIELD
- One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
- It can keep its plastic and sealing properties in a wide temperature range.
- Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
- Minimum moisture vapour and gas permeation.
- Excellent temperature stability: - 30°C to 80°C.
PACKAGING
A: 265KG B: 19KG
MF881R is a two-component, neutral room temperature curing silicone structural sealant. It has excellent flame retardancy, UV resistance and weather resistance. It can be used for the second sealing of hot mirror insulating glass.
It can be used at 10ºC~50ºC, and it has good adhesion to glass, ceramics, metal, hot mirror film and other materials
Neutral fast curing, no corrosion to the adhered surface
Good resistance to high and low temperature, keep good performance at -60ºC~200ºC
Excellent flame retardancy
No pollution to the environment
Excellent weather resistance and UV aging resistance
According to standards: GB 16776, GB/T 2406, GB/T 2408
Packing specification: MF881R heat mirror insulating glass special structural sealant A component and B component are provided in a 12:1 mass ratio.
Big drum packaging: A component 200L iron drum
B component 20L plastic bucket
Medium drum packaging: A 20L plastic drum
310ml plastic tube for component B
Hot mirror hollow glass is composed of two layers of glass and a special hot mirror film, and is separated into a double cavity hollow structure by double-layer special spacers.
Features:
Heat insulation and high efficiency shielding of ultraviolet rays
High light transmittance to prevent condensation
Efficient sound insulation, energy saving and environmental protection
Instructions
1. The surface to be adhered must be clean, dry, free of oil and dust. Moisten the MF2030 with a clean, lint-free cloth or paper, apply it to the surface to be adhered once and let it dry.
2. Please use it at a temperature of 10C~35C.
3. Long-term exposure of MF2030 to the air will cause failure. The MF2030 after opening should be used up within one month.
MF2030 becomes turbid and prohibited from use.
important hint
Do not use if it becomes turbid. This product is only suitable for experienced professionals. Before use, the actual substrate should be used for experiments to ensure adhesion and material compatibility.
other
The operating procedures released for this application will describe in detail the various technical data in the product technical parameter table. The following documents can be provided if needed:
Product Safety Data Sheet
package
250m/bottle, 1 bottle in aluminum bottle.
Data foundation
All technical parameters given in this product data sheet are based on laboratory test results. Since the actual situation is uncontrollable, the actual measured value may vary according to the actual situation.
Health and safety information
For information and suggestions on the transportation, use, storage and disposal of chemicals, customers can refer to the safety data sheet, which includes physical, ecological, toxicological and other relevant safety data.
Legal Notices
Under normal circumstances, when the products are stored, handled and used correctly according to the company's recommendations, whether it is the information here, or the recommendations for specific applications or the product, it is based on the company's current knowledge and experience of the product Made. In actual applications, due to differences in materials, substrates and actual application environments, it is not possible to use this information, nor to infer written or any other suggestions, to infer that the company makes any commitments and commitments to product commerciality and adaptability to specific applications. Take any legal responsibility. The user of the product must test whether the product is suitable for a specific application and purpose. The ownership of third parties must be respected. All orders are subject to current sales and delivery terms. Users must always refer to the latest relevant product data sheets, such as
If necessary, our company can provide.
){kind=link}