MF2000M permanent plastic sealing film
The MF2000M is suitable for seals of contacts, seams (metal, plastic, wood), etc., including bridges, automotive, equipment manufacturing, home appliances, ventilation equipment, etc.
Product Description
MF2000m is a single component, solvent, no sealing film having permanent plasticity. The MF200OM maintains its plasticity and sealing within a wider temperature range, and the surface does not crack, not hard. This product exhibits good corrosion resistance and aging resistance, water resistance. It has good adhesion to glass, metal, rubber, and plastic.
Instructions for use
Cleaning, dry bonding surface, remove dust, oil and lipids. The ambient temperature requirement is not less than 10 ° C during construction.
Store
Best storage conditions: -10 ° C ~ 30 ° C is cool and ventilated. Storage period: 24 months.
Transportation
The MF2000M is non-dangerous, and can be transported through train, cars, ships and aircraft.
Excellent adhesion to a wide range of substrates including coated, enamelled and reflective glasses, anodised and polyester paint coated aluminium and stainless steel.
Excellent temperature stability: - 60°C t 1ao0c.
High level of mechanical properties.
High elasticity and high modulus.
Resistant to ozone.
| TEST ITEMS |
TEST RESULTS |
TESTS1ANDARD |
| Base |
Polyisobutylene (PIB) |
- |
| Color |
Black |
- |
| Appearance |
Solid mass |
GB/T 1033.1 |
| Density |
1.1/1.25 fe/cm3] |
JC/T914 |
| Shear Strength |
0.21 MPa |
|
| Penetration (1 /1 Omm) |
25°C 40 |
|
| 130°C 290 |
JC/T 914 |
| Volatile Content |
Max. 0.02 % |
|
| Fogging |
Without visual fogging |
- |
| Moisture Vapour Transmission Rate (MVTR) |
0.26 [gr/m2.24hrs. 2mm] |
EN1279-4 |
| Gas Permeation Rate (Ar) |
1.30x10-3[gi7m2. hrs] |
EN1279-4 |
.APPLICATION FIELD
- One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
- It can keep its plastic and sealing properties in a wide temperature range.
- Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
- Minimum moisture vapour and gas permeation.
- Excellent temperature stability: - 30°C to 80°C.
PACKAGING
A: 265KG B: 19KG
MF881R is a two-component, neutral room temperature curing silicone structural sealant. It has excellent flame retardancy, UV resistance and weather resistance. It can be used for the second sealing of hot mirror insulating glass.
It can be used at 10ºC~50ºC, and it has good adhesion to glass, ceramics, metal, hot mirror film and other materials
Neutral fast curing, no corrosion to the adhered surface
Good resistance to high and low temperature, keep good performance at -60ºC~200ºC
Excellent flame retardancy
No pollution to the environment
Excellent weather resistance and UV aging resistance
According to standards: GB 16776, GB/T 2406, GB/T 2408
Packing specification: MF881R heat mirror insulating glass special structural sealant A component and B component are provided in a 12:1 mass ratio.
Big drum packaging: A component 200L iron drum
B component 20L plastic bucket
Medium drum packaging: A 20L plastic drum
310ml plastic tube for component B
Hot mirror hollow glass is composed of two layers of glass and a special hot mirror film, and is separated into a double cavity hollow structure by double-layer special spacers.
Features:
Heat insulation and high efficiency shielding of ultraviolet rays
High light transmittance to prevent condensation
Efficient sound insulation, energy saving and environmental protection
The MF2000m is suitable for seals of contacts, seams (metal, plastics, wood), etc., including bridges, automotive, equipment manufacturing, home appliances, ventilation equipment, etc.
Package
Barrels or rectangular containers, or roll buckets (50 mm × 40 m, 100 mm x 20m, 200 mm × 10m) of different diameters and sizes. Note: You can also customize it according to user needs.
Important
The above mentioned parameters, especially those related to the application, is based on our trials and experience. Due to the use of materials and construction conditions, we recommend that you need to complete the necessary tests before use to ensure that our products can be better applied.
){kind=link}