Mf890 Silicone Sealant with ASTM C920 and GB/T 14683 G, F 25hm Approved

• Customization: Available
• Capacity: 600ml
• Color: Black
• Model NO.: MF890
• Drying Time: 24 Hours
• Type: Silicone Sealant
• State: Fluid
• Mildew Proof: Mildew Proof
• Bonding Material: Glass
• Seal Tape Kind: Organic Material
• Seal Tape Usage: Architecture
• Transport Package: Cartridge
• Specification: 300 ml / 25 pcs/carton
• Trademark: SILANDE
• Origin: China
• HS Code: 3506919010
• Production Capacity: 50000PCS/Years
• Package Size: 21.00cm * 14.00cm * 18.00cm
• Package Gross Weight: 6.500kg
• Lead Time: 1 days (1 - 6000 ml) ; 3 days (6001 - 60000 ml) ; To be negotiated ( > 60000 ml)

Product Description

MF890 Silicone Sealant

MF890 Silicone Sealant is a one- part, RTV neutral-cure, architectural grade sealant. It easily extrudes in any weather and cures at ambient temperature by reaction with moisture in the air to form a durable, flexible silicone rubber seal. SILANDE MF890 may also be used to seal for housing window and door, freight container, car glass, metal cladding, ducting and interior sealing in building and housing, also designed for use in sealing for general glazing and showroom glazing and weatherproofing applications
 

♦ DESCRIPTION / APPLICATIONS
MF890 Silicone Sealant is a one- part, RTV neutral-cure, architectural grade sealant. It easily extrudes in any weather and cures at ambient temperature by reaction with moisture in the air to form a durable, flexible silicone rubber seal. SILANDE MF890 may also be used to seal for housing window and door, freight container, car glass, metal cladding, ducting and interior sealing in building and housing, also designed for use in sealing for general glazing and showroom glazing ans weatherproofing applications.
 

• TYPICAL PERFORMANCE
• Excellent adhesion to a wide range of substrates including coated glass, galvanized steel, masonry, anodized and polyester paint coated aluminium and stainless steel, and other porous and non- porous substrates.
• Ideal for expansion, connection, perimeter and other movement joints.
• Suitable for use on extension/compression movement capability of up to ±25% of the original joint width.
• Excellent temperature stability: -60°C to 180°C.
• High level of mechanical properties.
• High elasticity and high modulus.
• Resistant to ozone.

♦ TECHNICAL DATA - TYPICAL PROPERTIES

TEST ITEMS	TECHNICAL DATA	TEST RESULT	STANDARD
Test Conditions: T (23±2)°C, (50±5)% R.H.
Density, g/cm^3	-	1.49	GBfT 13477.2
Extrusion Property, ml/min	>80	285	GBfT 13477.3
Sag, mm	W3	0	GBfT 13477.6
Tack-free Time, h	W3	2.5	GB7 13477.5
Curing Time, d		7~ 14
Range of Application Temperature, °C	-	5-40	-
Test Conditions: 28d placed at T (23±2)°C, (50±5)% R.H.
Hardness, Shore A	20-60	53	GB<r 531.1
Elastic Recovery, %	N80	90	GB^T 13477.17
Range of Temperature Resistance, °C	-	-60-180	-
Weight Loss Rate, %	W10	3.1	GBfT 13477.19
Modulus at 100% Elongation, MPa	-	0.8	GBTT 13477.8
Elongation at Break, %	-	135
Tensile Strength, Mpa		1.2

Glue injection method
Install appropriate gasket materials, adhesive spacers or tape as required.
Continuously squeeze the MF889A-25 silicone stone weathering sealant into and fill the joints. When the sealant surface is not yet skinned, press the sealant into the gasket material and the joint surface with appropriate strength. It is recommended to use convex tools to trim the rubber surface into a concave shape. Do not use soap or water as auxiliary materials for trimming.
After finishing the dressing, remove the masking tape immediately.
Be careful not to splash the uncured silicone sealant on non-abrasive surfaces, such as polished granite or other natural stones, because these wet silicone sealants cannot be completely removed with organic or chlorinated solvents. Therefore, these surfaces must be masked, or extra care must be taken when applying glue to prevent the sealant from contacting these surfaces, once the uncured sealant comes in contact with
These surfaces, it will leave a layer of film on the surface, which may affect the appearance of the substrate surface.
 

• The well-packaged product can be stored for 12 months in a cool, ventilated, and dry place, and used before the "expiry date" of the outer packaging of the product
   

  TEST ITEMS	TEST RESULTS	TESTS1ANDARD
  Base	Polyisobutylene (PIB)	-
  Color	Black	-
  Appearance	Solid mass	GB/T 1033.1
  Density	1.1/1.25 fe/cm^3]	JC/T914
  Shear Strength	0.21 MPa
  Penetration (1 /1 Omm)	25°C 40
  	130°C 290	JC/T 914
  Volatile Content	Max. 0.02 %
  Fogging	Without visual fogging	-
  Moisture Vapour Transmission Rate (MVTR)	0.26 [gr/m^2.24hrs. 2mm]	EN1279-4
  Gas Permeation Rate (Ar)	1.30x10-^3[gi7m^2. hrs]	EN1279-4

  .APPLICATION FIELD

  • One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
  • It can keep its plastic and sealing properties in a wide temperature range.
  • Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
  • Minimum moisture vapour and gas permeation.
  • Excellent temperature stability: - 30°C to 80°C.

  ♦ TECHNICAL DATA - TYPICAL PROPERTIES
  MF322 two-component polyurethane corner glue
  Mainly used for bonding and sealing between aluminum alloy corners and profile cavities in aluminum alloy door and window structures; suitable for bonding wooden doors, windows and doors; for processed different materials, such as wood, building materials, ceramics and metals It has good adhesion.
  How to use instructions
  Remove dirt, dust, oil, frost, etc. on the surface of the substrate; place the plastic nozzle on the open bottle mouth and tighten it, and use a dedicated 1:1 double bottle glue gun to inject glue. Uncured glue can be cleaned with special cleaning agents (or other solvents such as alcohol).
  
  Packaging

  

  

  Packaging
  1:1 double plastic bottle packaging: 600 ml per group; 9 groups per carton
  
  Transport transmission
  This product is non-hazardous and can be transported by train, car, ship and plane
  
  Store
  Can be stored for 6 months in a cool, ventilated and dry place.
  
  Precautions and precautions
  The initial 20g of mixed glue may be insufficiently mixed and is not recommended.
  The glue mixed at room temperature should be used during the application period.
  Avoid contact with skin and eyes. If inadvertently, rinse immediately with plenty of water and consult a doctor if necessary;
  avoid contact with children; do not contaminate food, medicine or cosmetics.
  The heavy workpiece to be bonded should be avoided to move before it is completely cured, and measures should be taken to fix it when it is necessary to move.
  Recommended use conditions: temperature 15 ~ 35C, relative humidity 40% ~ 80%; if the temperature and humidity are lower than the recommended lower limit, the horn glue will cure more slowly, and if it is higher than the recommended upper limit, the construction time will be shortened.