MF897T transparent silicone anti-mold sealant
- Excellent antibacterial and anti-mildew performance;
- Transparent and no discoloration;
- Excellent weathering resistance;
- Neutral curing, suitable for coated glass, float glass, wooden materials, aluminum profiles, ceramics, masonry And many other materials;
- Good adhesion can be achieved without primer for most materials and components;
- The original joint width can be stretched/compressed by 12.5%; 7. No pollution to the environment.
Features and advantages
Excellent antibacterial and mildew resistance
Transparent, not changing color
Excellent weathering resistance
Neutral curing, suitable for coating glass, float glass, wood materials, aluminum profiles, ceramics, masonry and other materials
For most materials and components, good adhesion can be achieved without primer
The original seam width can be stretched/compressed by 12.5%
No pollution to the environment
composition
One-component, neutral, room temperature moisture curing silicone sealant.
application
MF897T transparent silicone anti-mold sealant is mainly used for moisture-proof and mildew-proof sealing of various food cold storages, kitchen equipment, shower rooms, bathtubs, basins, toilets, etc., and other wet parts of use places
Seal.
product manual
MF897T transparent silicone anti-mold sealant is a one-component, non-sagging, neutral curing sealant, which can be easily squeezed out and used under most external ambient temperatures, and with the help of moisture in the air. The reaction cures to form a durable and elastic silicone sealant.
Adopt standard
MF897T transparent silicone anti-mold sealant meets or exceeds the following standards
Fan: JC/T 885 SR, 12.5E, 0
Application method
Surface cleaning
Remove grease, dust, water stains, frosting, and surface dirt from the joints to make them clean, dry and free of dirt.
Glue injection
The area connected to the seam should be covered with masking tape to ensure a neat and beautiful sealant line.
For some material surfaces, primer may be required to ensure good adhesion. It is recommended to do adhesion test before the project starts.
Application method
Surface cleaning
Remove grease, dust, water stains, frosting, and surface dirt from the joints to make them clean, dry and free of dirt.
Glue injection
The area connected to the seam should be covered with masking tape to ensure a neat and beautiful sealant line.
For some material surfaces, primer may be required to ensure good adhesion. It is recommended to do adhesion test before the project starts. , Continuously squeeze MF897T transparent silicone anti-mold sealant into and fill up the joints (the sealant can be constructed using pneumatic glue guns and other glue injection equipment). When using a pneumatic gun, the operating pressure should be adjusted to prevent bubbles from being generated during glue injection.
When the surface of the sealant is not yet skinned, level the sealant with appropriate strength.
After leveling, remove the masking tape immediately. Do not use liquids such as water, soapy water, or alcohol to help level it....Continuously squeeze MF897T transparent silicone anti-mold sealant into and fill up the joints (the sealant can be constructed using pneumatic glue guns and other glue injection equipment). When using a pneumatic gun, the operating pressure should be adjusted to prevent bubbles from being generated during glue injection.
When the surface of the sealant is not yet skinned, level the sealant with appropriate strength.
After leveling, remove the masking tape immediately. Do not use liquids such as water, soapy water, or alcohol to help level it.
Operation precautions
If it gets into the eyes accidentally, rinse immediately with plenty of water
Do not contact with skin for a long time, avoid contact with children
Do not contaminate food, drugs or cosmetics
Before use, please do a bonding test and refer to the company's technical data and safety data sheet to learn about the safe use and hazards of the product. All safety items not involved in this product, please follow the requirements of JGJ 102
Storage and validity period
The packaged product can be stored for 12 months in a cool, ventilated, and dry place, and used before the "expiry date" of the outer packaging
package
Plastic tube: 300ml per tube, 25 tubes per box
Use restrictions
This product is not allowed to be used as a structural adhesive, nor has it been tested or stated as suitable
For medical or medicinal purposes.
This product is not suitable for:
Joints in groundwater or places subject to excessive friction
Long-term immersion in water
It may ooze oil, plasticizer, solvent on the surface of building materials, or partly vulcanize
Rubber gasket or tape
On frosty or wet surfaces
Places that are completely inaccessible to air during curing (the sealant needs to be cured by moisture)
Application of paint on the surface of the sealant (generally paint cannot adhere to the surface of silicone)
Direct contact with food or other food-grade surface applications
Welcome to send email for further information!
Audited Supplier 
){kind=link}
){kind=link}