Mf1602 Prefabricated Building Silicon Modified Polyether Sealant

• Customization: Available
• Capacity: 600ml
• Color: White
• Model NO.: MF1602
• Drying Time: 24 Hours
• Material: Composite Materials
• Usage: Construction, Industrial
• Type: Silicone Sealant
• State: Fluid
• Mildew Proof: Mildew Proof
• Bonding Material: Glass
• Seal Tape Kind: Organic Material
• Seal Tape Usage: Architecture
• Transport Package: Carton
• Specification: 300ml / 25 pcs/carton
• Trademark: SILANDE
• Origin: China
• HS Code: 3506919010
• Production Capacity: 50000PCS/Years
• Package Size: 21.00cm * 14.00cm * 18.00cm
• Package Gross Weight: 6.500kg
• Lead Time: 1 days (1 - 6000 Pieces) ; 3 days (6001 - 60000 Pieces) ; To be negotiated ( > 60000 Pieces)

Product Description

MF1602 prefabricated building silicon modified polyether sealant
Features and Benefits
Environmental protection: low VOC, non-toxic, odorless, no pollution to the substrate, no corrosion;
The surface can be painted: after the surface is dry, the surface can be sprayed with paint. Color;
Good operability: single-component, easy to operate, can be directly extruded with a glue gun for direct construction;
Excellent adhesion: It has excellent adhesion to most building materials such as aluminum, stone, concrete, etc.;
Displacement capacity reaches level 20, has low modulus and good permanent deformation characteristics, can adapt well to the joint displacement of cement concrete, and has excellent weathering resistance.
Excellent adhesion to a wide range of substrates including coated, enamelled and reflective glasses, anodised and polyester paint coated aluminium and stainless steel. 
Excellent temperature stability: - 60°C t 1ao0c. 
High level of mechanical properties. 
High elasticity and high modulus. 
Resistant to ozone. 

TEST ITEMS	TEST RESULTS	TESTS1ANDARD
Base	Polyisobutylene (PIB)	-
Color	Black	-
Appearance	Solid mass	GB/T 1033.1
Density	1.1/1.25 fe/cm^3]	JC/T914
Shear Strength	0.21 MPa
Penetration (1 /1 Omm)	25°C 40
	130°C 290	JC/T 914
Volatile Content	Max. 0.02 %
Fogging	Without visual fogging	-
Moisture Vapour Transmission Rate (MVTR)	0.26 [gr/m^2.24hrs. 2mm]	EN1279-4
Gas Permeation Rate (Ar)	1.30x10-^3[gi7m^2. hrs]	EN1279-4

.APPLICATION FIELD

• One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
• It can keep its plastic and sealing properties in a wide temperature range.
• Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
• Minimum moisture vapour and gas permeation.
• Excellent temperature stability: - 30°C to 80°C.

PACKAGING

A: 265KG B: 19KG 

MF881R is a two-component, neutral room temperature curing silicone structural sealant. It has excellent flame retardancy, UV resistance and weather resistance. It can be used for the second sealing of hot mirror insulating glass.
It can be used at 10ºC~50ºC, and it has good adhesion to glass, ceramics, metal, hot mirror film and other materials
Neutral fast curing, no corrosion to the adhered surface
Good resistance to high and low temperature, keep good performance at -60ºC~200ºC
Excellent flame retardancy
No pollution to the environment
Excellent weather resistance and UV aging resistance

According to standards: GB 16776, GB/T 2406, GB/T 2408
Packing specification: MF881R heat mirror insulating glass special structural sealant A component and B component are provided in a 12:1 mass ratio.
Big drum packaging: A component 200L iron drum
                   B component 20L plastic bucket
Medium drum packaging: A 20L plastic drum
                   310ml plastic tube for component B

 

Hot mirror hollow glass is composed of two layers of glass and a special hot mirror film, and is separated into a double cavity hollow structure by double-layer special spacers.
Features:
Heat insulation and high efficiency shielding of ultraviolet rays
High light transmittance to prevent condensation
Efficient sound insulation, energy saving and environmental protection

Colour
In addition to black, white, and gray, it can also be produced in consultation with the special colors required by customers.

Adopt Standard
MF 1602 prefabricated building silicone modified polyether sealant meets or exceeds the following standard specifications:
GB/T 14683 20L .M-R

Composition
One-component, neutral, room temperature moisture curing silicon modified polyether sealant.

Application
All kinds of prefabricated concrete buildings [window installation and internal and external wall filling and sealing;
Gap filling and sealing of interior door frames, window sills, interior walls and other parts of the building;
The bonding of various building materials and interior parts, such as aluminum, concrete, etc., kitchen and bathroom mirrors, pendants, etc.;.
Other suitable bonding and sealing applications of this product in the construction field.

Application Method
Before using this product, the operator must carefully read the product safety information.
The construction surface must be clean, dry, free of dust, water stains, frost, dirty surface, residual sealant, etc.
Paste protective tape on both sides of the construction surface, and use suitable cushioning materials in the caulking.
Cut the pointed mouth according to the required size, continuously squeeze in and fill the interface, and the amount of glue applied should meet the full contact with the adhesive sealing surface.
When the surface of the sealant is not yet skinned, flatten the sealant with appropriate strength on the backing material and seam surface, and remove the protective tape.
Keep good ventilation during construction and curing.
In order to ensure the best bonding effect, a bonding test should be carried out before the project starts, and it must be used with the primer if necessary. Peel adhesion test should be carried out regularly during the construction process to ensure the construction quality.