MF910S Thermoplastic spacer for insulating glass
MF910S is a warm edge spacer for making insulating glass. MF910S is composed of a thermoplastic elastomer containing a desiccant, which is used to dry the air in the cavity of two insulating glass units.
product manual
MF910S is a warm edge spacer for making insulating glass. MF910S is composed of a thermoplastic elastomer containing a desiccant, which is used to dry the air in the cavity of two hollow glass units.
Instructions for use
Clean and dry the bonding surface to remove dust, oil and grease. MF910S is coated with a special hot-melt butyl extruder for the hollow glass production line. The specific use conditions can be achieved by adjusting the temperature and pressure. The extrusion temperature range is 120C ~ 140C, and the ambient temperature during construction should not be lower than 18C.
Precautions
Before construction, please read the instructions, safety data sheets, and packaging labels carefully to obtain information on safe use and health hazards. Note: When using this hot melt adhesive or any other hot melt sealant, proper care should be taken to avoid burns.
Scope of use
MF910S cannot be used as a structural adhesive. It is mainly used in the production of insulating glass. It is used in conjunction with the two-component polysulfide sealant produced by the company to complete the double-sealing. The double-pass sealed insulating glass made with this product meets the requirements of GB/T11944.
Store
Best storage conditions: a cool, ventilated and dry place, storage period: 12 months (unopened packaging drum)
package
Iron drum packing: 220kg (φ571.5mm) / drum
transport
MF910S is a non-dangerous product and can be transported by train, car, ship and plane.
important
The above-mentioned relevant parameters of this product, especially relevant hints about application, are put forward on the basis of our test and experience. Due to the different materials and construction conditions, we recommend that you complete the necessary tests before use to ensure that our products can be better used.
Welcome to send email for further information!