MF3250 Butyl Sealing Tape
MF3250 is a one-component, solvent-free, non-fogging, non-vulcanized, permanent plastic sealing tape. MF3250 maintains its plasticity and airtightness in a wide temperature range, and the surface does not crack or harden. The product exhibits good adhesion performance, medium strength, good high temperature resistance and chemical properties, and maintains plasticity at low temperatures, so it is not easy to become brittle or crushed into pieces. It has passed the EN45545 flame retardant performance test and TB/T3139 " "The limit of harmful substances in interior materials and indoor air of rolling stock" test.
Scope of use
MF3250 sealing tape is mainly used in the transportation field. For sealing points, roof welds (metal, plastic, wood), etc.
Instructions for use
Clean and dry the bonding surface to remove dust, oil and grease. The ambient temperature during construction shall not be lower than 10C.
Store
Best storage conditions: -10C ~ 30C in a cool, ventilated and dry place.
Storage period:
12 months.
package
Drums or rectangular containers, or roll drums of different diameters and sizes (50mmx 2mmx 5m, 50mm x 2mmx 10m).
transport
MF3250 butyl sealing tape is non-dangerous and can be transported by train, car, ship and plane.
important
The above-mentioned relevant parameters of this product, especially the relevant hints about the application, are put forward on the basis of our test and experience. Due to the different materials and construction conditions, we recommend that you complete the necessary tests before use to ensure that our products can be better used.
.APPLICATION FIELD
- One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
- It can keep its plastic and sealing properties in a wide temperature range.
- Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
- Minimum moisture vapour and gas permeation.
- Excellent temperature stability: - 30°C to 80°C.
♦ TECHNICAL DATA - TYPICAL PROPERTIES
| TEST ITEMS |
TEST RESULTS |
TESTS1ANDARD |
| Base |
Polyisobutylene (PIB) |
- |
| Color |
Black |
- |
| Appearance |
Solid mass |
GB/T 1033.1 |
| Density |
1.1/1.25 fe/cm3] |
JC/T914 |
| Shear Strength |
0.21 MPa |
|
| Penetration (1 /1 Omm) |
25°C 40 |
|
| 130°C 290 |
JC/T 914 |
| Volatile Content |
Max. 0.02 % |
|
| Fogging |
Without visual fogging |
- |
| Moisture Vapour Transmission Rate (MVTR) |
0.26 [gr/m2.24hrs. 2mm] |
EN1279-4 |
| Gas Permeation Rate (Ar) |
1.30x10-3[gi7m2. hrs] |
EN1279-4 |
♦ APPLICATION INSTRUCTIONS
Hot Applied Butyl Sealant for Insulating Glass
Primary Sealant for the Manufacturing of Insulating Glass
.APPLICATION FIELD
- One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
- It can keep its plastic and sealing properties in a wide temperature range.
- Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
- Minimum moisture vapour and gas permeation.
- Excellent temperature stability: - 30°C to 80°C.
♦ TECHNICAL DATA - TYPICAL PROPERTIES
MF322 two-component polyurethane corner glue
Mainly used for bonding and sealing between aluminum alloy corners and profile cavities in aluminum alloy door and window structures; suitable for bonding wooden doors, windows and doors; for processed different materials, such as wood, building materials, ceramics and metals It has good adhesion.
How to use instructions
Remove dirt, dust, oil, frost, etc. on the surface of the substrate; place the plastic nozzle on the open bottle mouth and tighten it, and use a dedicated 1:1 double bottle glue gun to inject glue. Uncured glue can be cleaned with special cleaning agents (or other solvents such as alcohol).
Package and Delivery
Packaging
1:1 double plastic bottle packaging: 600 ml per group; 9 groups per carton
Transport transmission
This product is non-hazardous and can be transported by train, car, ship and plane
Store
Can be stored for 6 months in a cool, ventilated and dry place.
Precautions and precautions
The initial 20g of mixed glue may be insufficiently mixed and is not recommended.
The glue mixed at room temperature should be used during the application period.
Avoid contact with skin and eyes. If inadvertently, rinse immediately with plenty of water and consult a doctor if necessary;
avoid contact with children; do not contaminate food, medicine or cosmetics.
The heavy workpiece to be bonded should be avoided to move before it is completely cured, and measures should be taken to fix it when it is necessary to move.
Recommended use conditions: temperature 15 ~ 35C, relative humidity 40% ~ 80%; if the temperature and humidity are lower than the recommended lower limit, the horn glue will cure more slowly, and if it is higher than the recommended upper limit, the construction time will be shortened.
){kind=link}