Premium Windshield Adhesive Sealant for Automotive and Glass

• Customization: Available
• Density: High Density
• Flammability: Flame Retardant
• Model NO.: MF203
• Hardness: Soft
• Open Cell Content: High Open Cell
• Usage: Building Insulation
• Type: Sealant
• Material: Composite Materials
• State: Nonfluid
• Mildew Proof: Mildew Proof
• Seal Tape Kind: Organic Material
• Seal Tape Usage: Bonding
• Bonding Material: Wood Metal Ceramic Plastic
• Transport Package: Carton
• Specification: 300ML/PC
• Trademark: SILANDE
• Origin: China
• HS Code: 3506919010
• Production Capacity: 500000tubes/Month
• Package Size: 21.00cm * 14.00cm * 18.00cm
• Package Gross Weight: 6.500kg
• Lead Time: 1 days (1 - 6000 ml) ; 3 days (6001 - 60000 ml) ; To be negotiated ( > 60000 ml)

Product Description

MF203 Polyurethane Automobile Windshield Sealant
MF203 polyurethane sealant is a high-quality, high-purpose, anti-sagging, one-component polyurethane sealant, which reacts with moisture in the air to cure to form a permanent elastomer. MF203 is manufactured in strict accordance with the ISO9001/14001 quality assurance system and related protection regulations.

Application:
Mainly applied in the direct assembly of automobile windshield, the sealing of side window and rear window glass, and the joint sealing of watercraft, container and refrigerated container, etc.

Characteristic:
One component, moisture cured at room temperature.
Excellent load-bearing capacity and vibration resistance.
High adhesion strength to metal and glass, etc.
No flow in vertical application.

Properties:
 
(Test conditions: at the temperature of (23±2)ºC and relative humidity of (50±5)%)

Instruction:
1. Get rid of dust, oil stain, water, etc. on the construction surface.
2. Pierce the cartridge tip, screw up a nozzle, cut the nozzle with a sloping section according to the construction requirement, inject the sealant in place with a sealant gun.
3. Suggest to do a test on adhesive property of substrate materials, details refer to the product instructions.

Attention:
1. Pre-test is necessary to ensure the excellent adhesive property.
2. Finish use in one day once unsealed the sealant, otherwise, store it strictly tightened.
3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary, keep away from children, and avoid contaminating food, medicine or cosmetics.
4. Use fix aids (pressure sensitive adhesive tape, spacer block, etc.) in the sealant curing time if bonded workpiece is heavy or need to move.

Recommendation:
Temperature:15-35ºC, relative humidity: 40%-80%, ventilated place.

Storage:
6 months stored in a cool, dry and ventilated place below 25ºC.

Package:
Cartridge Package: Aluminium tube, 300ml/pc.
Sausage Package: 400ml/600ml.

• The well-packaged product can be stored for 12 months in a cool, ventilated, and dry place, and used before the "expiry date" of the outer packaging of the product
   

  TEST ITEMS	TEST RESULTS	TESTS1ANDARD
  Base	Polyisobutylene (PIB)	-
  Color	Black	-
  Appearance	Solid mass	GB/T 1033.1
  Density	1.1/1.25 fe/cm^3]	JC/T914
  Shear Strength	0.21 MPa
  Penetration (1 /1 Omm)	25°C 40
  	130°C 290	JC/T 914
  Volatile Content	Max. 0.02 %
  Fogging	Without visual fogging	-
  Moisture Vapour Transmission Rate (MVTR)	0.26 [gr/m^2.24hrs. 2mm]	EN1279-4
  Gas Permeation Rate (Ar)	1.30x10-^3[gi7m^2. hrs]	EN1279-4

  .APPLICATION FIELD

  • One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
  • It can keep its plastic and sealing properties in a wide temperature range.
  • Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
  • Minimum moisture vapour and gas permeation.
  • Excellent temperature stability: - 30°C to 80°C.

  ♦ TECHNICAL DATA - TYPICAL PROPERTIES
  MF322 two-component polyurethane corner glue
  Mainly used for bonding and sealing between aluminum alloy corners and profile cavities in aluminum alloy door and window structures; suitable for bonding wooden doors, windows and doors; for processed different materials, such as wood, building materials, ceramics and metals It has good adhesion.
  How to use instructions
  Remove dirt, dust, oil, frost, etc. on the surface of the substrate; place the plastic nozzle on the open bottle mouth and tighten it, and use a dedicated 1:1 double bottle glue gun to inject glue. Uncured glue can be cleaned with special cleaning agents (or other solvents such as alcohol).
  
  Packaging

  

  

  Packaging
  1:1 double plastic bottle packaging: 600 ml per group; 9 groups per carton
  
  Transport transmission
  This product is non-hazardous and can be transported by train, car, ship and plane
  
  Store
  Can be stored for 6 months in a cool, ventilated and dry place.
  
  Precautions and precautions
  The initial 20g of mixed glue may be insufficiently mixed and is not recommended.
  The glue mixed at room temperature should be used during the application period.
  Avoid contact with skin and eyes. If inadvertently, rinse immediately with plenty of water and consult a doctor if necessary;
  avoid contact with children; do not contaminate food, medicine or cosmetics.
  The heavy workpiece to be bonded should be avoided to move before it is completely cured, and measures should be taken to fix it when it is necessary to move.
  Recommended use conditions: temperature 15 ~ 35C, relative humidity 40% ~ 80%; if the temperature and humidity are lower than the recommended lower limit, the horn glue will cure more slowly, and if it is higher than the recommended upper limit, the construction time will be shortened.