• Mf205 Polyurethane Sealant for Wood and Metal
  • Mf205 Polyurethane Sealant for Wood and Metal
  • Mf205 Polyurethane Sealant for Wood and Metal
  • Mf205 Polyurethane Sealant for Wood and Metal
  • Mf205 Polyurethane Sealant for Wood and Metal
  • Mf205 Polyurethane Sealant for Wood and Metal

Mf205 Polyurethane Sealant for Wood and Metal

Type: Silicone Sealant
Seal Tape Kind: Organic Material
Seal Tape Usage: Architecture
Material: Composite Materials
State: Fluid
Mildew Proof: Mildew Proof
Samples:
US$ 50/Box 1 Box(Min.Order)
| Request Sample
Customization:
Diamond Member Since 2010

Suppliers with verified business licenses

Basic Info.

Model NO.
MF205
Bonding Material
Glass
Transport Package
Carton
Specification
600ml / 20 pcs/box
Trademark
SILANDE
Origin
China
HS Code
3506919010
Production Capacity
50000PCS/Years

Product Description

MF205 polyurethane sealant
MF205 polyurethane sealant is a high-quality, multi-purpose, anti-sagging, one-component polyurethane sealant, which reacts with moisture in the air to cure to form a permanent elastomer. MF205 is manufactured in strict accordance with the ISO900114001 quality assurance system and related protection regulations.

Surface treatment
The bonding surface must be clean, dry and remove all kinds of oil, wax and dust.

construction
Hard packaging: Just pierce the aluminum film of the barrel mouth.
Flexible packaging: Put the glue into the glue gun and cut off the sealing mouth. Cut the glue nozzle according to the width of the seam. Use a suitable manual or pneumatic glue gun to drive the glue into the seam. Be careful to avoid air bubbles between the substrate and the glue. After the package is opened, it must be used up in a relatively short time. Do not apply at temperatures below 5C or above 40C. The best temperature for the substrate and sealant is 15C to 25C.

Trimming and finishing
Refurbishment and finishing must be carried out before the table thousand. The dressing agent or lubrication must be tested for compatibility in advance.

Clean up
Uncured MF205 can be removed from tools or equipment with appropriate solvents. After curing, it can only be removed mechanically. Hands and exposed skin should be cleaned with suitable industrial hand sanitizer and water immediately after the glue is applied. Do not use solvents!

Other Information
If requested by the customer, the following information can be provided:.
Safety Data Sheet

package:
Flexible packaging: 600ml/piece, 20 pieces per box

Data basis:
All data stated in the product data sheet are measured in the laboratory. As the environment is beyond our control, the actual measured data may be different.
Health and safety information:
For information and suggestions on transportation, operation, storage and chemical handling, users should refer to the actual safety data sheet.

transport:
MF205 is non-hazardous and can be transported by train, car, ship and plane.

important:
The above-mentioned relevant parameters of this product, especially relevant hints about application, are put forward on the basis of our test and experience. Due to the different materials and construction conditions, we recommend that you complete the necessary tests before use to ensure that our products can be better used.




Mf205 Polyurethane Sealant for Wood and Metal
Mf205 Polyurethane Sealant for Wood and Metal

Mf205 Polyurethane Sealant for Wood and Metal
Mf205 Polyurethane Sealant for Wood and Metal

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now