Mf4160 Transparent Silicone Plastic Packaging Sealant

• Customization: Available
• Capacity: 600ml
• Color: White
• Model NO.: MF4160
• Drying Time: 24 Hours
• Material: Composite Materials
• Usage: Construction, Industrial
• Dilivery: 7-10 Days
• Type: Silicone Sealant
• State: Fluid
• Mildew Proof: Mildew Proof
• Bonding Material: Glass
• Seal Tape Kind: Organic Material
• Seal Tape Usage: LED &Electronic
• Transport Package: Bottle
• Specification: 250g 500g 1kg
• Trademark: SILANDE
• Origin: China
• HS Code: 3506919010
• Production Capacity: 8000000PCS/Year
• Package Size: 21.00cm * 14.00cm * 18.00cm
• Package Gross Weight: 6.500kg
• Lead Time: 1 days (1 - 6000 ML) ; 3 days (6001 - 60000 ML) ; To be negotiated ( > 60000 ML)

Product Description

MF4160 Transparent Silicone Plastic Packaging
Introduction:
Two-component, addition-curable, optically transparent liquid silicone rubber.
Features:
1. A refractive index of 1.41.
2. High transparency, light transmission rate is more than 93%.
3. High hardness, high strength, high toughness and high heat resistance.
4. Easy to use, two-component 1: 1 (mass ratio), fast cure.
Usage:
LED SMD package protection, integration, COB package, and fiber optic connectors, photovoltaic cells and other components.
Instructions:
1. Applied to a surface cleaning treatment to remove pollutants affect the cured product, possible contaminants include compounds, acetylene or vinyl compounds containing nitrogen, sulfur, phosphorus, and tin, lead, mercury , arsenic and other heavy metal ions.
2. A and B components were mixed in a 1: 1 ratio (mass ratio) by using a stirring uniform and other equipment.
3. When cured, can be carried out according to standard conditions, and make the appropriate adjustments according to the size and so on.
Storage and Validity:
The product should be stored in airtight cool, ventilated and dry place below 27 ºC away from direct sunlight. Unopened product shelf life is 12 months.
Precautions:
1. The product does not contain ingredients toxic or corrosive substances, according to general chemical proper protection. Gloves can be worn during use (to avoid catalyst poisoning, the choice of polyethylene gloves to avoid the use of rubber gloves), goggles, etc., in order to prevent product splashing into the eyes, on skin, and so on.
2. Such as the use of oven equipment for curing oven thermostat blast air circulation should be used to avoid large concentration of volatile gases.
3. Acidic, basic and certain metal-organic products, especially seriously affect the performance and storage performance B component.
4. Before using this product should read the Material Safety Data Sheet (MSDS).
5. Above the relevant parameters on the product, particularly with regard to the application of the relevant hint that it is based on tests and experience raised. Due to the use of different materials and construction conditions, it is recommended before use to carry out the necessary testing to ensure that products can be better used.
Package:
Plastic barrels: A component of 250g / bottle B component 250g / bottle           A component of 500g / bottle B component 500g / bottle          A component of 1kg / bottle B component 1kg / bottle
Transportation:
This product is non-dangerous goods, can be transported by train, car, ship and airplane.
 

• The well-packaged product can be stored for 12 months in a cool, ventilated, and dry place, and used before the "expiry date" of the outer packaging of the product
   

  TEST ITEMS	TEST RESULTS	TESTS1ANDARD
  Base	Polyisobutylene (PIB)	-
  Color	Black	-
  Appearance	Solid mass	GB/T 1033.1
  Density	1.1/1.25 fe/cm^3]	JC/T914
  Shear Strength	0.21 MPa
  Penetration (1 /1 Omm)	25°C 40
  	130°C 290	JC/T 914
  Volatile Content	Max. 0.02 %
  Fogging	Without visual fogging	-
  Moisture Vapour Transmission Rate (MVTR)	0.26 [gr/m^2.24hrs. 2mm]	EN1279-4
  Gas Permeation Rate (Ar)	1.30x10-^3[gi7m^2. hrs]	EN1279-4

  .APPLICATION FIELD

  • One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
  • It can keep its plastic and sealing properties in a wide temperature range.
  • Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
  • Minimum moisture vapour and gas permeation.
  • Excellent temperature stability: - 30°C to 80°C.

  ♦ TECHNICAL DATA - TYPICAL PROPERTIES
  MF322 two-component polyurethane corner glue
  Mainly used for bonding and sealing between aluminum alloy corners and profile cavities in aluminum alloy door and window structures; suitable for bonding wooden doors, windows and doors; for processed different materials, such as wood, building materials, ceramics and metals It has good adhesion.
  How to use instructions
  Remove dirt, dust, oil, frost, etc. on the surface of the substrate; place the plastic nozzle on the open bottle mouth and tighten it, and use a dedicated 1:1 double bottle glue gun to inject glue. Uncured glue can be cleaned with special cleaning agents (or other solvents such as alcohol).
  
  Packaging

  

  

  Packaging
  1:1 double plastic bottle packaging: 600 ml per group; 9 groups per carton
  
  Transport transmission
  This product is non-hazardous and can be transported by train, car, ship and plane
  
  Store
  Can be stored for 6 months in a cool, ventilated and dry place.
  
  Precautions and precautions
  The initial 20g of mixed glue may be insufficiently mixed and is not recommended.
  The glue mixed at room temperature should be used during the application period.
  Avoid contact with skin and eyes. If inadvertently, rinse immediately with plenty of water and consult a doctor if necessary;
  avoid contact with children; do not contaminate food, medicine or cosmetics.
  The heavy workpiece to be bonded should be avoided to move before it is completely cured, and measures should be taken to fix it when it is necessary to move.
  Recommended use conditions: temperature 15 ~ 35C, relative humidity 40% ~ 80%; if the temperature and humidity are lower than the recommended lower limit, the horn glue will cure more slowly, and if it is higher than the recommended upper limit, the construction time will be shortened.