MF965F elastic protective coating
1. Neutral curing at room temperature, no corrosion to the surface to be adhered;
2. Excellent weathering resistance, ultraviolet aging resistance, high and low temperature resistance, stable performance between -30ºC and 180ºC; 3. Excellent anti-corrosion performance , Resistant to chemical impurities such as acid, alkali and salt, and outstanding in resistance to ammonium sulfate;
4. No solvent and low boiling point substances, no pollution to the environment;
5. Excellent adhesion to various metal substrates and concrete surfaces 6. The construction is simple and efficient, and even coating can be achieved by using coating tools or equipment.
.APPLICATION FIELD
- One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
- It can keep its plastic and sealing properties in a wide temperature range.
- Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
- Minimum moisture vapour and gas permeation.
- Excellent temperature stability: - 30°C to 80°C.
♦ TECHNICAL DATA - TYPICAL PROPERTIES
| TEST ITEMS |
TEST RESULTS |
TESTS1ANDARD |
| Base |
Polyisobutylene (PIB) |
- |
| Color |
Black |
- |
| Appearance |
Solid mass |
GB/T 1033.1 |
| Density |
1.1/1.25 fe/cm3] |
JC/T914 |
| Shear Strength |
0.21 MPa |
|
| Penetration (1 /1 Omm) |
25°C 40 |
|
| 130°C 290 |
JC/T 914 |
| Volatile Content |
Max. 0.02 % |
|
| Fogging |
Without visual fogging |
- |
| Moisture Vapour Transmission Rate (MVTR) |
0.26 [gr/m2.24hrs. 2mm] |
EN1279-4 |
| Gas Permeation Rate (Ar) |
1.30x10-3[gi7m2. hrs] |
EN1279-4 |
♦ APPLICATION INSTRUCTIONS
Hot Applied Butyl Sealant for Insulating Glass
Primary Sealant for the Manufacturing of Insulating Glass
.APPLICATION FIELD
- One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
- It can keep its plastic and sealing properties in a wide temperature range.
- Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
- Minimum moisture vapour and gas permeation.
- Excellent temperature stability: - 30°C to 80°C.
♦ TECHNICAL DATA - TYPICAL PROPERTIES
| TEST ITEMS |
TEST RESULTS |
TESTS1ANDARD |
| Base |
Polyisobutylene (PIB) |
- |
| Color |
Black |
- |
| Appearance |
Solid mass |
GB/T 1033.1 |
| Density |
1.1/1.25 fe/cm3] |
JC/T914 |
| Shear Strength |
0.21 MPa |
|
| Penetration (1 /1 Omm) |
25°C 40 |
|
| 130°C 290 |
JC/T 914 |
| Volatile Content |
Max. 0.02 % |
|
| Fogging |
Without visual fogging |
- |
| Moisture Vapour Transmission Rate (MVTR) |
0.26 [gr/m2.24hrs. 2mm] |
EN1279-4 |
| Gas Permeation Rate (Ar) |
1.30x10-3[gi7m2. hrs] |
EN1279-4 |
MF322 two-component polyurethane corner glue
Mainly used for bonding and sealing between aluminum alloy corners and profile cavities in aluminum alloy door and window structures; suitable for bonding wooden doors, windows and doors; for processed different materials, such as wood, building materials, ceramics and metals It has good adhesion.
How to use instructions
Remove dirt, dust, oil, frost, etc. on the surface of the substrate; place the plastic nozzle on the open bottle mouth and tighten it, and use a dedicated 1:1 double bottle glue gun to inject glue. Uncured glue can be cleaned with special cleaning agents (or other solvents such as alcohol).
Package and Delivery
Packaging
1:1 double plastic bottle packaging: 600 ml per group; 9 groups per carton
Transport transmission
This product is non-hazardous and can be transported by train, car, ship and plane
Store
Can be stored for 6 months in a cool, ventilated and dry place.
Precautions and precautions
The initial 20g of mixed glue may be insufficiently mixed and is not recommended.
The glue mixed at room temperature should be used during the application period.
Avoid contact with skin and eyes. If inadvertently, rinse immediately with plenty of water and consult a doctor if necessary;
avoid contact with children; do not contaminate food, medicine or cosmetics.
The heavy workpiece to be bonded should be avoided to move before it is completely cured, and measures should be taken to fix it when it is necessary to move.
Recommended use conditions: temperature 15 ~ 35C, relative humidity 40% ~ 80%; if the temperature and humidity are lower than the recommended lower limit, the horn glue will cure more slowly, and if it is higher than the recommended upper limit, the construction time will be shortened.
Features and advantages
Neutral curing at room temperature, no corrosion to the adhered surface
Excellent weather resistance, ultraviolet aging resistance, high and low temperature resistance, stable performance between -30C and 180C
Excellent anti-corrosion performance, resistance to acid, alkali, salt and other chemical media, outstanding in resistance to ammonium sulfate
No solvent and low boiling point substances, no pollution to the environment
Excellent adhesion to various metal substrates and concrete surfaces
Simple construction and high construction efficiency, even coating can be achieved by using coating tools or equipment
composition
One-component, neutral, room temperature moisture curing elastic protective coating.
application
MF965F elastic protective coating is suitable for building exterior walls, concrete surfaces, steel structures
Weather-resistant, waterproof and anti-corrosion coating of structure and other substrates.
product manual
MF965F elastic protective coating is a one-component, low viscosity, neutral curing at room temperature. It has a multi-functional elastic protective coating such as waterproof, fireproof, anti-corrosion, and weather resistance. It has good properties for glass, aluminum, concrete, steel and other materials. Cohesiveness, uniform coating can be achieved by coating tools or equipment, which greatly improves construction efficiency.
Application method
Basic requirements
The surface of the foundation is free of grease, dust, water stains, frost, surface dirt and pollutants.
No primer material is required for ordinary glass, aluminum, concrete, steel and other materials
Compatibility bonding test on the base surface material before construction
Construction Conditions
Environmental temperature can not be constructed in an environment lower than 5C
Basic surface temperature 5C-35C
The basic surface moisture content is dry
Calculate with glue amount
Example: Coating area is 1m2, thickness is 1mm, material specific gravity is 1.35g/cm3
Material consumption: 10000cm2 *0.1cm*1.35g/cm*=1350g=1.35kg
Painting
In order to ensure that the sealant does not pollute the surrounding area during construction, use protective tape to protect it.
Use painting tools to coat large areas, such as scrapers, rollers, spray guns, etc.
It is required that the painting is uniform and beautiful, and the thickness is greater than 0.5mm. It can be painted by multi-pass stacking method.
After use, if there is remaining glue, reseal it for next use.
Tool cleaning
Clean tools in time after finishing painting, use alcohol or acetone solvent to clean tools
If the tool. The upper sealing material has been cured, you can cut the rubber surface with a scraper tool to clean it.
Adopt standard
MF965F elastic protective coating meets the following standard specifications:
GB/T 13477
GB/T 19746
IEC61215
JG/T475
GB/T 528
Operation precautions
If it gets into eyes accidentally, rinse with water immediately
Do not contact with skin for a long time, avoid contact with children
Do not contaminate food, drugs or cosmetics
Before use, please do a cohesive test and refer to the company's technical data and safety data sheet to learn about the safe use and hazards of the product. All safety matters not involved in this product, please follow the requirements of JGJ 102.
Storage and validity period
The well-packaged product can be stored for 9 months in a cool, ventilated and dry place, and used before the "expiry date" of the outer packaging of the product.
package
Color: provide painting colors as needed, such as white, gray, blue, etc.
Packing: 10kg/drum
Use restrictions
This product is not allowed to be used as a structural glue, nor has it been tested or stated as suitable for medical or pharmaceutical use.
This product is not suitable for:
Interfaces in groundwater or places subject to excessive friction
Oil, plasticizer, solvent may ooze on the surface of building materials, or partially vulcanized rubber gasket or tape
Places that are completely inaccessible to air when curing on frosted or wet surfaces (sealant needs to be cured by moisture)
Application of paint on the surface of the sealant (generally paint cannot adhere to the surface of silicone)
Direct contact with food or other food-grade surface applications
){kind=link}