MF3130R hot melt damping glue
MF3130R hot-melt damping adhesive is a non-drying sheet-mounted sealing material with butyl rubber as the base material. It is baked in the coating baking line or directly bonded to form a damping structure with the body and other parts. It has good adhesion, high tensile strength, five poisons, tasteless, corrosion resistance, aging resistance, excellent waterproof performance, etc. It is a kind of shock absorption, reinforcement, heat insulation, noise reduction and sound insulation material that must be used in vehicles .
product description:
MF3130R hot-melt damping adhesive is a non-drying sheet-like sealing material with butyl rubber as the base material. It is baked in the coating baking line or directly bonded to form a damping structure with the body and other parts. It has good adhesion, high tensile strength, non-toxic and tasteless, corrosion resistance, aging resistance, excellent waterproof performance, etc. It is a kind of shock absorption, reinforcement, heat insulation, noise reduction and sound insulation that must be used in the car material.
Product superiority:
Single component, non-toxic and tasteless
Vibration reduction, sound insulation, noise reduction
Convenient construction
Use range:
It is mainly used for shock absorption and sealing of body, floor, door, air conditioner, hood, flat surface, etc., and can also be used for sealing of mechanical vibration in other industries such as elevators, air conditioners, washing machines, ships, etc.
Instructions for use:
Surface treatment
Please remove the water, oil, dust and other dirt on the surface of the board to be glued before use.
package:
Use PET release film inner packaging and then use carton outer packaging.
2mmx150mmx800mm, 3mmx100mmX500mm; or packaging according to customer requirements.
Storage:
Best storage conditions: a cool, ventilated and dry place;
Storage period: 12 months.
transport:
MF3130R is non-hazardous and can be transported by train, car, ship and plane.
Data basis:
All the data stated in the product data sheet are obtained from laboratory tests. As the environment is beyond our control, the actual measured data may be different.
Health and safety information:
For information and suggestions related to transportation, operation, storage and chemical handling, users should refer to the actual safety data sheet, which includes physical, ecological, toxicological and other safety-related data.
important:
The above-mentioned relevant parameters of this product, especially the relevant hints about the application, are put forward on the basis of our test and experience. Due to the different materials and construction conditions, we recommend that you complete the necessary tests before use to ensure that our products can be better used.
-
The well-packaged product can be stored for 12 months in a cool, ventilated, and dry place, and used before the "expiry date" of the outer packaging of the product
| TEST ITEMS |
TEST RESULTS |
TESTS1ANDARD |
| Base |
Polyisobutylene (PIB) |
- |
| Color |
Black |
- |
| Appearance |
Solid mass |
GB/T 1033.1 |
| Density |
1.1/1.25 fe/cm3] |
JC/T914 |
| Shear Strength |
0.21 MPa |
|
| Penetration (1 /1 Omm) |
25°C 40 |
|
| 130°C 290 |
JC/T 914 |
| Volatile Content |
Max. 0.02 % |
|
| Fogging |
Without visual fogging |
- |
| Moisture Vapour Transmission Rate (MVTR) |
0.26 [gr/m2.24hrs. 2mm] |
EN1279-4 |
| Gas Permeation Rate (Ar) |
1.30x10-3[gi7m2. hrs] |
EN1279-4 |
.APPLICATION FIELD
- One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
- It can keep its plastic and sealing properties in a wide temperature range.
- Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
- Minimum moisture vapour and gas permeation.
- Excellent temperature stability: - 30°C to 80°C.
♦ TECHNICAL DATA - TYPICAL PROPERTIES
MF322 two-component polyurethane corner glue
Mainly used for bonding and sealing between aluminum alloy corners and profile cavities in aluminum alloy door and window structures; suitable for bonding wooden doors, windows and doors; for processed different materials, such as wood, building materials, ceramics and metals It has good adhesion.
How to use instructions
Remove dirt, dust, oil, frost, etc. on the surface of the substrate; place the plastic nozzle on the open bottle mouth and tighten it, and use a dedicated 1:1 double bottle glue gun to inject glue. Uncured glue can be cleaned with special cleaning agents (or other solvents such as alcohol).
Packaging
Packaging
1:1 double plastic bottle packaging: 600 ml per group; 9 groups per carton
Transport transmission
This product is non-hazardous and can be transported by train, car, ship and plane
Store
Can be stored for 6 months in a cool, ventilated and dry place.
Precautions and precautions
The initial 20g of mixed glue may be insufficiently mixed and is not recommended.
The glue mixed at room temperature should be used during the application period.
Avoid contact with skin and eyes. If inadvertently, rinse immediately with plenty of water and consult a doctor if necessary;
avoid contact with children; do not contaminate food, medicine or cosmetics.
The heavy workpiece to be bonded should be avoided to move before it is completely cured, and measures should be taken to fix it when it is necessary to move.
Recommended use conditions: temperature 15 ~ 35C, relative humidity 40% ~ 80%; if the temperature and humidity are lower than the recommended lower limit, the horn glue will cure more slowly, and if it is higher than the recommended upper limit, the construction time will be shortened.
){kind=link}