Mf3000 Butyl Sealant

• Type: Silicone Sealant
• Seal Tape Kind: Organic Material
• Seal Tape Usage: Biking, Motorcycle
• Material: Composite Materials
• State: Fluid
• Mildew Proof: Mildew Proof
• Model NO.: MF3000
• Bonding Material: Aluminum
• Transport Package: Cartons
• Specification: 500g/piece, 25kg/barrel (285mm)
• Trademark: SILANDE
• Origin: China
• HS Code: 3506919010
• Production Capacity: 8000000PCS/Year

Product Description

MF3000 Butyl Sealant

MF3000 is a one-component, solvent-free, non-fogging, non-vulcanization, and permanent plastic sealant. It maintains its plasticity and sealing in a wide temperature range, and the surface does not crack or harden. It has good adhesion to glass, metal, rubber (PVC, EPDM), plastic and other materials.

Product superiority
Single component, no solvent
Good construction performance
For glass, metal, rubber (PVC, EPDM), plastic and other materials
Good adhesion

Use range
MF3000 is widely used as a sealing material for interior parts (such as rubber, plastic, metal). It is widely used in the automotive industry or parts supply field:
Adhesive and waterproof of automobile windshield and side window
Construction of decorative strips (such as tourist cars)
Construction of vehicle rain gutter
Construction of spoiler
Bonding of rainwater protection film on car door

Instructions for use
Surface treatment
Clean and dry the bonding surface to remove dust, oil and grease.

construction
In order to ensure the bonding strength, the ambient temperature must not be lower than 10C. It is advisable to vent properly before coating to reduce internal bubbles and voids, and prevent bubbles from being generated during extrusion and causing glue breakage.
MF3000 is suitable for spray gun, gear, screw or rotary pump construction. Pumps, pressure plates, pipelines and nozzles must be heatable. Because the pressure plate can be heated, the MF3000 on the pressure plate surface can be softened, so it can be pumped out. The hot coating extrusion equipment is equipped with multiple independent heating and control systems. The temperature is the lowest at the pressing plate and the highest temperature is reached at the nozzle. The operating temperature is between 90C ~ 130C, and the appropriate range depends on the output and other independent equipment. The spray gun used for heating can be operated on a fixed foundation or connected to an automatic operating system. The spray gun for construction can be designed according to individual equipment.

Store
Best storage conditions: a cool, ventilated and dry place.
Storage period: 24 months.

package
Packing specification: 500g/piece, 25kg/barrel (φ 285mm)

Data foundation
All the data stated in the product data sheet are obtained from laboratory tests. As the environment is beyond our control, the actual measured data may be different

Health and safety information
For information and suggestions related to transportation, operation, storage and chemical handling, users should refer to the actual safety data sheet, which includes physical, ecological, toxicological and other safety-related data.

transport
MF3000 is non-hazardous and can be transported by train, car, ship and airplane.

important
The above-mentioned relevant parameters of this product, especially relevant hints about application, are put forward on the basis of our test and experience. Due to the different materials and construction conditions, we recommend that you complete the necessary tests before use to ensure that our products can be better used.