Two-Component Silicone Structural Sealant for Insulating Glass

• Type: Silicone Sealant
• Seal Tape Kind: Organic Material
• Seal Tape Usage: Architecture
• Material: Composite Materials
• State: Fluid
• Mildew Proof: Mildew Proof
• Model NO.: MF881-25
• Bonding Material: Glass
• Dilivery: 7-10 Days
• Transport Package: Drum
• Specification: 190L 30kg
• Trademark: SILANDE
• Origin: China
• HS Code: 3506919010
• Production Capacity: 8000000PCS/Year

Product Description

MF881-25 Two-component Silicone Structural Sealant for Insulating Glass
Introduction: MF881-25silicone structural sealant is a two-component, neutral cure, high flexibility, high modul us silicone sealant, to meet the technical requirements in GB16776 and ETAG002 , which can provide quality assuranc.

DETAILS:
Introduction:
MF881-25 silicone structural sealant is a two-component, neutral cure, high flexibility, high modulus silicone sealant,to meet the technical requirements in GB16776 and ETAG002, which can provide quality assurance for 25 years.
Features:
High strength and high modulus.
Excellent adhesion properties.
Excellent resistance to high temperature.
No corrosion and no pollution to environment.
Purposes:
Mainly used for structural assembly of high building, super high rise curtain wall, large-size glass plate curtain wall, complex structural curtain wall, manufacture of Insulating Glass, can also be used on anti-corrosion sealing for pipeline flange, bridge, shipbuilding, sewage disposal factory, subway, construction, and oil platform.
Instructions:
1.Surface cleaning
To ensure the structural sealant with good adhesion, sticky surface must be clean, dry and free of dirt.
To prevent contamination of sealant surrounding joints,surface protection tape must be used to protect construction,when the construction is completed, the tape will be removed.
2. Cleaning Process
2.1 You must use a clean lint-free cloth
The solvent can be used to clean fresh ethanol, acetone, isopropanol, methyl ethyl ketone, xylene, etc.
2.2 Use "Method of double cloth"
a. Wipe the area with a piece of sticky infiltration by solvent clean lint-free cloth.
b. In the solvent evaporation before drying immediately with a second clean, lint-free cloth to wipe the surface.
c. Area must be cleaned after completion of construction within one hour, otherwise re-cleaning.
d. Use calico dip solvent rather than white cloth placed in the container infiltration,to avoid contamination container inside a clean solvent; used cloth should be replaced.
e. In the area, open flame is prohibited.
Mixing process:
Conduct mixing in a closed mixing system.
Com A and ComB are uniformly mix at 12: 1 weight ratio.
|Users can also be based on actual need to change the mixing ratio, and then adjust the curing speed. Distribution ratio (mass ratio) Com A: Com B = 11: 1 ~ 14: 1.