Mf910g-Hot Applied Butyl Sealant for Insulating Glass-Ift, TUV, Igma/Igcc Approved

• Type: Polyisobutylene
• Seal Tape Kind: Organic Material
• Seal Tape Usage: Architecture
• Material: Composite Materials
• State: Fluid
• Mildew Proof: Mildew Proof
• Model NO.: MF910G
• Bonding Material: Glass
• Certificate: Ift, Igma/Igcc
• Delivery: 7-10 Days
• Transport Package: Barrel
• Specification: 7kg/barrel
• Trademark: SILANDE
• Origin: China
• HS Code: 3506919090
• Production Capacity: 500000PCS/Year

Product Description

Primary Sealant for the Manufacturing of Insulating Glass

♦ APPLICATION FIELD

• One component, solvent free, non­fogging, permanently plastic butyl sealant , formulated for primary sealing of insulating glass units.
• It can keep its plastic and sealing properties in a wide temperature range.
• Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
• Minimum moisture vapour and gas permeation.
• Excellent temperature stability: - 30°C to 80°C.

. TECHNICAL DATA - TYPICAL PROPERTIES

TEST ITEMS	TEST RESULTS	TEST STANDARD
Base	Polyisobutylene (P)	-
Color	Black, White, Crey, Clear	-
Appearance	Solid mass	JCH914
Density	appro x.1.05 [g/cm^3]	GB/T 1033.1
Shear Strength	0.24 MPa
Penetration (1/10mm)	25°C            42
	130°C           246	JC/T 914
Volatile Content	Max. 0.02 %
Fogging	Without visual fogging	-
Moisture Vapour Transmission Rate(MVTR)	0.25 [gr/m^2. 24hrs. 2mm]	EN1279-4
Gas Permeation Rate(Ar)	1.40x10-^3[gr/m^2. hrs]	EN1279-4

♦ APPLICATION INSTRUCTIONS

 

 

 

GLASS I SPACER - To achieve good adhesion, the glass/ spacer surface must be clean, dry and free of any residue.
SILANDE MF910G shall be applied at a temperature between 100 °C and 150 °C using appropriate extruders.

 

 

 

♦ APPLICABLE STANDARDS

• EU Specification: EN1279 - part 4
• China Specification: JC/T 914
• IGCC-IGMA Approved.

FIRST AID INFORMATION

♦ SHELF LIFE AND STORAGE
24 months stored in cool, dry and ventilated places.

♦ PACKAGING

Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Wash contaminated clothing and clean shoes before reuse. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. If swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give person two glasses of water. Never give anything by mouth to an unconscious person. Keep out of reach children. Refer to Material Safety Data Sheet (MSDS) and Technical Date Sheet (TDS) for details. Emergency Telephone Number: [phone]

7 kg/barrel (O 190mm)

6 kg/barrel (0 190mm)

190 kg/drum (0 571.5mm)