MF897 silicone anti-mold sealant
MF897 silicone anti-mold sealant is a one-component, non-sagging, neutral curing sealant, which can be easily extruded for use under most external ambient temperatures, and is cured by the water vapor in the air Form a durable, elastic silicone sealant.
Features and advantages
Excellent antibacterial and mildew resistance
Neutral curing, suitable for coating glass, float glass, wood materials, aluminum profiles, ceramics, masonry and other materials
The original seam width can be stretched/compressed by 25%
Excellent weather resistance, sunlight, rain, ice, snow, ozone or extreme temperature will not cause adverse effects
For most materials and components, good adhesion can be achieved without primer
Easy to use, can be squeezed out at any time with a general glue gun
Excellent anti-sag performance
composition
One-component, neutral, room temperature moisture curing silicone sealant.
application
MF897 silicone anti-mold sealant is mainly used in various food cold storage, kitchen equipment, shower room, bath
Moisture-proof and mildew-proof sealing of tanks, basins, toilets, etc., and sealing of wet parts in other places of use.
product manual
MF897 silicone anti-mold sealant is a one-component, non-sagging, neutral curing sealant, which can be easily squeezed out under most of the ambient temperature, and is cured by the water vapor in the air. Form a durable, elastic silicone sealant.
colour
In addition to black, gray and white, it can also be produced in consultation according to the special colors required by customers
Adopt standards
MF897 silicone anti-mold sealant meets or exceeds the following standard specifications:
JC/T 885 SR, 0
ASTM C920S type, NS type, 25 grade
Application method
Surface cleaning
Remove grease, dust, water stains, frost, surface dirt, etc. at the joints to make them clean, dry and free of dirt.
Glue injection
The area connected with the seam should be covered with masking tape to ensure a neat and beautiful sealant line.
For some material surfaces, primer may be required to ensure good adhesion. It is recommended to do adhesion test before the project starts.
Continuously squeeze MF897 silicone anti-mold sealant into and fill up the joints (the sealant can be applied with a pneumatic glue gun and other glue injection equipment). When using a pneumatic gun, the operating pressure should be adjusted to prevent bubbles from being generated during glue injection.
Continuously squeeze the MF897 silicone anti-mold sealant into and fill up the joints (the sealant can be applied with a pneumatic glue gun and other glue injection equipment).
When using a pneumatic gun, the operating pressure should be adjusted to prevent bubbles from being generated during glue injection.
When the surface of the sealant is not yet skinned, level the sealant with appropriate strength.
After leveling, remove the masking tape immediately. Do not use liquids such as water, soapy water, or alcohol to help level it.
Operation precautions
If it gets into the eyes accidentally, rinse immediately with plenty of water
Do not contact with skin for a long time, avoid contact with children
Do not contaminate food, drugs or cosmetics
Before use, please do a bonding test and refer to the company's technical data and safety data sheet to learn about the safe use and hazards of the product. All safety items not involved in this product, please follow the requirements of JGJ 102
Storage and validity period
The packaged product can be stored for 12 months in a cool, ventilated, and dry place, and used before the "expiry date" of the outer packaging of the product
package
Plastic tube: 300ml per tube, 25 tubes per box
Use restrictions
This product is not allowed to be used as a structural adhesive, nor has it been tested or stated as suitable for medical or pharmaceutical use.
This product is not suitable for:
Joints in groundwater or places subject to excessive friction
Long-term immersion in water
On the surface of building materials that may seep oil, plasticizer, solvent, or partially vulcanized rubber gasket or tape
On frosty or wet surfaces
Places that are completely inaccessible to air during curing (the sealant needs to be cured by moisture)
The application of paint on the surface of the sealant
surface)
main indicators
| Guideline |
Test items |
skills requirement |
Test results |
| When uncured, test under the conditions of temperature (23±2)ºC and relative humidity (50±5)% |
| GB/T 13477.2 |
density,g/cm3 |
- |
1.53 |
| GB/T13477.6 |
Sag,mm |
≤3 |
o |
| GB16776 |
Extrusion,s |
≤10 |
2.0 |
| |
Construction time,min |
- |
20 |
| GB/T13477.5 |
Tack-free time,h |
≤3 |
2.5 |
| |
Bonding time,d |
- |
7~14 |
| |
Construction temperature range,ºC |
- |
5~40 |
| Curing for 28 days under the conditions of temperature (23±2)ºC and relative humidity (50±5)% |
| GB/T531.1 |
hardness,Shore A |
20~60 |
50 |
| |
Temperature resistance range after curing,ºC |
- |
-60180 |
| GB 1741 |
Anti-mildew performance |
O level |
O level |
| GB/T 22083 |
Displacement ability,% |
25 |
25 |
| GB/T 13477.8 |
100% elongation modulus,MPa
Elongation at break,%
Tensile Strength,MPa |
|
0.9
190
1.2 |
Welcome to send email for further information!
Audited Supplier 
){kind=link}
){kind=link}