Mf910 Hot Applied Butyl Sealant for Insulating Glass

• Type: Silicone Sealant
• Seal Tape Kind: Liquid Tape
• Seal Tape Usage: Plumbing
• Material: Composite Materials
• State: Fluid
• Mildew Proof: Mildew Proof
• Model NO.: MF910
• Bonding Material: Glass
• Transport Package: Drum
• Specification: 6.5kg/box
• Trademark: SILANDE
• Origin: China
• HS Code: 3506919090
• Production Capacity: 10000cartons/Month

Product Description

MF910 Hot Applied Butyl Sealant for Insulating Glass
Primary Sealant for the Manufacturing of Insulating Glass

.APPLICATION FIELD

• One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
• It can keep its plastic and sealing properties in a wide temperature range.
• Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
• Minimum moisture vapour and gas permeation.
• Excellent temperature stability: - 30°C to 80°C.

TECHNICAL DATA - TYPICAL PROPERTIES

TEST ITEMS	TEST RESULTS	TESTS1ANDARD
Base	Polyisobutylene (PIB)	-
Color	Black	-
Appearance	Solid mass	GB/T 1033.1
Density	1.1/1.25 fe/cm^3]	JC/T914
Shear Strength	0.21 MPa
Penetration (1 /1 Omm)	25°C 40
	130°C 290	JC/T 914
Volatile Content	Max. 0.02 %
Fogging	Without visual fogging	-
Moisture Vapour Transmission Rate (MVTR)	0.26 [gr/m^2.24hrs. 2mm]	EN1279-4
Gas Permeation Rate (Ar)	1.30x10-^3[gi7m^2. hrs]	EN1279-4

SURFACE PREPARATION

GLASS / SPACER - lb achieve good adhesion, the glass / spacer surface must be clean, dry and free of any residue.
SILANDE MF910 shall be applied at a temperature between 100 °C and 150 °C using appropriate extruders.

APPLICABLE STANDARDS

• EU Specification: EN1279 - part 4
• China Specification: JC/T 914

• SHELF LIFE AND STORAGE

24 months stored in cool, dry and ventilated places.

PACKAGING

7 kg/barrel (<P 190mm)
6 kg/barrel (<P 185mm)
5 kg/barrel (0 160mm)
2 kg/barrel (<P 126mm)

FIRST AID INFORMATION

Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Wash contaminated clothing and clean shoes before reuse. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. If swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give person two glasses of water. Never give anything by mouth to an unconscious person. Keep out of reach children. Refer to Material Safety Data Sheet (MSDS) and Technical Date Sheet (TDS) for details.   



According to the method specified in GB/T1033
(Dipping method) proceed.
Data accuracy is controlled within ±0.0001g
 Mettler analytical balance


In this test, according to the JC/T 914 standard, 6 cube specimens with a side length of 20mm were made. After weighing, they were placed horizontally under standard conditions for 8 hours, and 5 of them were placed in an oven at 130°C. After 50h, measure the mass loss of the heat-treated sample and check the surface changes.

Sample
This indicator is to characterize the pros and cons of product flexibility. The test refers to the method specified in the recovery value in GB/T 12828, and the sample is a cube with a side length of 20mm.


William Plastometer
This index characterizes the softness and hardness of the product at room temperature and the hot melt performance and rheological properties at high temperature. The normal temperature value (25°C) characterizes the state of the sealant during use; the high temperature value (130°C) characterizes the state of the sealant during construction. The test method adopts the JC/T914 standard, the test mold is type A, and the test time is 5s.


Penetration Tester